By Stenner Pump Company
Model # S1N85MJL1A1S
The STS tank series is an all-in-one group and taken system that offers easy chemical replenishment and convenience. The unit is pre-assembled at the factory to help reduce installation time. The pump is mounted vertically for spill containment and includes a rain roof to prevent liquid intrusion into the motor housing. The tank systems are shipped with the single head Classic series pump models.
Features
Pump Specs. (Different Pumps Available Upon Request)
What is included with this pump system?
Reply
The following accessories are included: 3 Connecting nuts (1/4" or 3/8"); 3 Ferrules w/ 1/4" & 6 mm OR 2 ferrules w/ 3/8"; 1 Injection check valve (100 psi) OR (1) injection fitting (25 psi); 1 Weighted strainer; 1 20' Roll of suction/discharge tubing 1/4" or 3/8" white or UV black OR Europe 6 mm white; 1 Spare pump tube; 1 Mounting bracket; 1 Installation and maintenance manual
Reply
I have a fusion soft 2 chlorine generator and am using the iAqualink 2 system to control salt generation. How can i best automate my pH control with this tank system or another?
Reply
I have the exact set up you have =) Jandy used to make a chemical automation system which would add onto your Aqualink, this system was called the the Chemlink. The Chemlink was discontinued and there is no longer a product that integrates the Aqualink and the stenner system. I had the Chemlink and was not that thrilled with its performance as the sensors would always give false readings. The best thing I have found was to regularly test your pool water over a month or so to find out what your dosage rate of pH should be and then set this directly on the Stenner Pump.
Reply