By Olympic Paint


Details

Top

Model # 12GL

Alternate Part #'s 2212GL

Product Description

POXOLON 2 is a high gloss epoxy pool coating that is easy to apply and should yield up to five years of service. This finish is very easy to clean as is the case with all epoxy pool coatings. You may use POXOLON 2 on most conventional pool surfaces with excellent results. 

Uncoated pool surfaces will require a prime coat to insure good adhesion. Recommended for use by pool service companies and the do it yourself pool owner. Use with primer on concrete, plaster, fiberglass and metal pools. 

Two finish coats of POXOLON 2 are required in all cases. POXOLON 2 may be applied by either airless sprayer or roller.

 

Coverage: Approximately 225 - 250 square feet per gallon. Available in these attractive colors: White, Blue Ice, Blue Mist, Bikini Blue, Viking Blue, Spanish Blue, Sunshine Yellow, Red Pepper, Black, and Clear.

Top

?     Asked on 4/25/2018by stan

what color is viking blue? its ne of your pool paints. do you have a colbolt blue?
 Reply

A  Answered on 4/25/2018 by InyoPools Product Specialist Alex V.

Stan, Viking blue is a deep blue (almost purple) color. Unfortunately, we do not carry a cobalt blue. We do carry other paints that you can view here
 Reply


?     Asked on 6/4/2019by Kay

How many sq ft will the Poxolon 2-part epoxy cover??? My pool is 20x40 with a 12ft deep end...How many gals. do I need??? My pool has been painted before, it's a Gunite bottom and fiberglass sides. Also what's the difference in the Poxolon ???? Does it last longer??? Is it a 1- coat paint???
 Reply

A  Answered on 6/8/2019 by InyoPools Product Specialist Lennox H.

Hi, Kay. It covers approximately 225 - 250 square feet per gallon. You need to determine what the pool is currently painted with in order to proceed, Previously Coated Pools. Your pool has a surface area of 1,280 square feet.  The POXOLON 2 is a high gloss epoxy pool coating that is easy to apply and should yield up to five years of service.
 Reply

  • Commented on 6/8/2019 by Product Owner

    How are you coming up with 13 gallons for 2- coats or 6.5 gallons for 1 coat
     Reply


?     Asked on 10/10/2019by Mari

I would like to purchase the epoxy seal paint. I have roughly 17,000 gallons. Would you say 2 gallons would be enough? Also, I have pin cracks in the floor of the pool. So I am told I don't need anything else to cover the cracks. Please reply... Thanking you.
 Reply

A  Answered on 10/11/2019 by InyoPools Product Specialist Megan C.

Please refer to our How to Paint a Pool with Epoxy Paint http://www.inyopools.com/HowToPage/how_to_paint_a_pool_with_epoxy_paint.aspx if you paint with the Olympic Poxolon 1 Gallon Bright Color, Two Coat Epoxy - Spanish Blue - 2211GL Two coats of Poxolon required covers approx. 225-250 sq. ft. per gallon, http://www.inyopools.com/Products/21300024086884.htm see Swimming Pool Paint for other color options http://www.inyopools.com/ProductListing/miscellaneous_paint.aspx
 Reply