$290.43
Part # PL3503
Warranty 1 Year Warranty
Cut cost not quality with the PureLine Pure Water Pump
The PureLine Pure Water Pump is our newest, premiere pump that rivals top brands like Hayward®, Pentair®, Sta-Rite®, Jacuzzi®, and Waterway® for only 2/3 of the cost. Equipped with extra large 2” plumbing ports results in higher flow rates and longer motor life. The PureLine Pure Water is a direct drop-in replacement for the popular Hayward® Super II Pump, this means that there is no realigning of the plumbing significantly reducing the time and energy it takes to swap out to a new pump. The Pure Water pump is fully stocked with quick disconnect unions ($40 Value) and backed by a one-year warranty.
Specs:
PureLine Pure Water Pump Application:
PureLine Pure Water Pump Benefits:
Pump Curve
Disclaimer:
All manufacturers’ names, brand names, trademarks, images, symbols, descriptions, and part numbers are used herein for reference purposes only.
i have a hayward super pump 11 1.5 hp 2.0 in lines will this pump be too much gallons per hour and stress the plumbing
Reply
Hi Bill - No this pump would not stress the plumbing and would be very similar in it's Gallon Per Minute Output as the Hayward Super II. I would highly reccommend this pump as a replacement to a Hayward Super II.
Reply
Is this the high efficiency motor (UCT1102) instead of standard efficiency motor (UST1102)? It looks like it has a running cap which makes me think it is. Nameplate pic would be nice.
Does it come with a lid wrench?
Can I make my existing Super Pump plumbing work with this Super II unit? It appears the Super and Super II plumbing dimensions are very close (about .5" difference).
Reply
Hi Nate, The motor on this pump uses 6 amp @ 230V and 12 amps @ 115V which is little higher than the UCT1102 motor. A lid wrench is not included but can be purchased separately p/n SP3100T. You will need to adjust your plumbing to make this pump work.
Reply
Is the PureLine Pure Water Pool Pump 2 HP pump 1 or 2 HP? The specs in the product details list it as 1 HP. In looking at the pump curves in the description, am I using the 1 or 2 HP curve for this specific pump? Obviously it makes a lot of difference considering the 1 HP curve is well below my desired flow rate and the 2 HP curve is moderately above my desired flow rate (but does not exceed the filters max flow rate).
Reply
Hi Duane, The PureLine PureWater PL3503 is a 2 HP pump and we are correcting the specification at the bottom of the page which was wrong, thank you for bringing that to our attention. The pump curves are correct the two lower lines are for the 1 HP and 2 HP models, the two upper lines are for the 3 HP and 4 HP models which we do not carry.
Reply