PER THE MANUFACTURER: THIS ITEM IS NOT AVAILABLE FOR SALE ONLINE
Model # PLP4
Manufacturer Code PL-P-4
Create and control the ultimate pool experience.
ProLogic is a scalable, flexible line of Total Pool Management controls that suit any backyard environment. It takes the work out of owning a pool and spa by automating all essential pool and spa functions, water chemistry, salt chlorination, custom light shows and other backyard features like water features, lights and sprinklers. Pro Logic even offers an interface to home automation systems. Home owners can use their existing control panels to view and mange anything under the control of Pro Logic.
Whether homeowners have basic pool functions or an extensive backyard paradise, the Pro Logic series offers the right level of control for any environment control that can easily be added at any time.
ProLogic Models
Optional Features:
What is the difference between the Aqua Logic and Pro Logic?
Reply
The main difference between the Pro Logic and Aqua Logic is that the Pro Logic can accommodate Hayward/Goldline's new Sense and Dispense module. The Sense and Dispense module will sense how much chlorine and pH is in your pool and dispense the proper amount of chlorine or pH back into your pool. You will require a Stenner liquid acid pump & tank or CO2 tank for the pH portion of sense & dispense. The chlorine portion of Sense & Dispense will be taken care of by the Salt Chlorine generator. The Pro Logic also has enhanced user interface over the Aqua Logic and is an overall upgraded system.
Reply
What is the ColorLogic Network Module designed for?
Reply
The ColorLogic network module is designed to be used with the new ColorLogic 4.0 lights and the ProLogic System. When used together the ColorLogic lights will display 101 color tones, 16 themed shows, while controlling light brightness, speed and movement. The 4.0 ColorLogic Lights can be seen here http://www.inyopools.com/lights_colorlogic.aspx. The ProLogic Systems & ColorLogic Modules can be seen here http://www.inyopools.com/sanitizers_pro_logic.aspx.
Reply
Do i just need the light and my current prologic controller which runs my pool filter and spa etc.. or do i have to have a separate controller for the colorlogic led pool light?
Reply
You can use just the ProLogic to control the ColorLogic light but you will only be using a fraction of the overall control capabilities. To get the complete control capabilities you would need to order the ColorLogic Gen. 4.0 light here http://www.inyopools.com/lights_colorlogic.aspx along with the ColorLogic Communication Module here http://www.inyopools.com/Products/02200000040136.htmWhen using the ColorLogic Communication Module with the ProLogic the ColorLogic lights will display 101 color tones, 16 themed shows, while controlling light brightness, speed and movement.
Reply
Can I install the Pro Logic myself?
Reply
The Pro Logic is a large, multifunction, high voltage control system. For safety reasons, it is very important that the Pro Logic be installed per NEC(National Electric Code) and local electrical codes. In addition, the Pro Logic must be configured (programmed) to control the particular equipment on your pool. Hayward highly recommends that the Pro Logic be installed by a licensed professional.
Reply
Will the Pro Logic control 2-speed filter pumps?
Reply
All Pro Logic models can be configured to control 2-speed filter pumps. Unlike other pool automation controls, no special relays are required. However, the 2-speed filter pump will require the use of 2 of the Pro Logic's high voltage relays. The installation manual contains complete instructions for configuring 2-speed pump operation and it is very important the instructions be followed in order to prevent damage to either the pump or control. Separate high speed and low speed time periods can be programmed and also the you can manually control the pump with a single button: Push once to turn the pump on in high speed mode, push again to switch to low speed (the pump must run a minimum of 3 minutes at high speed in order to properly prime), and finally push the button again to turn the filter pump off.
Reply
The Most Helpful Review
6 1
(5 out of 5 stars)
Reviewed By: Sean S from Anderson, IN ()
Pros: Quick shipping great product
Cons: None
Very easy to install and setup. The manual is well written and the functions are laid out in an easy to understand manner that makes the automation easy to setup. The physical construction of the parts appear to be good and well thought out.
Was this review helpful to you?
The Most Recent Reviews
5 0
(4 out of 5 stars) Great automation of pool
Reviewed By: BrDaC from new orleans ()
Pros: Works like it should.
Cons: cost to repair
Easy to use and set up. If the electronic board goes bad it cost 90 to 95% of a new unit.
Was this review helpful to you?
5 0
(5 out of 5 stars) chlorinator control
Reviewed By: wicho from california ()
Pros: love it
Cons: expensive
Very easy to controle, love the salt system. Is to expensive. My old controler only lasted 6 yrs, hope this one last longer.
Was this review helpful to you?
5 1
(5 out of 5 stars) User Friendly
Reviewed By: Mycle from Austin, Texas ()
Pros: Easy to use and have not had to mess with chems
I have had the Pro Logic for over a month and to me it is fully automatic. However I can say that because I had it installed. I wanted it to be set up correctly the first time and it is. I have not had to do anything. It is a fully automatic system. I look forward to buying the wireless control for this unit.
Was this review helpful to you?