By Century Motors
Part # BN50V1
Warranty 1 Year
Dimensions 12" L x 8.5" W x 5.5" D
Century 1.5 HP Thru-Bolt 48Y Dual Speed Motor - BN50V1
Application: Above Ground Pools & Spas Replaces: Sta-Rite, Hayward, American Products, Hydra Bath, Pac Fab, Jacuzzi, Doughboy, Etc... Features: All copper windins, Auto protector, Open drip proof, Stainless steel threaded shaft, Thrubolt pump mount, "1081" design, 60 HZ , 115V, H.P = 1.5 High Speed / .188 Low Speed, Full load Amps = 13.5 High speed / 4.7 Low Speed, Frame 48Y, Threaded Shaft
**NOTE THIS MOTOR IS SHIPPED LESS HI-LO SWITCH. YOU MAY PURCHASE THE HI-LO SWITCH SEPARATELY BY ORDERING PART # 18313301.**
Note: NOT California Title 20 Compliant.
Can you direct me to the proper hi low switch for this motor?
Reply
Unfortunately the manufacturer does not offer the switch for the 2 speed 220v motors any longer. If you already have a 220 volt timer (on/off) you would need an Intermatic T106R to switch from high to low speed. If you do not have a timer currently you would need the T10604R which is a 220v on/off timer and a high/low timer.
Reply
Hi,
I have a Sta-Rite JWPA S5F-2A4 assembly with a S48B74A03 motor. I would like to replace the failed motor with a two speed motor and a manual switch. Will this motor work/fit?
Reply
Kevin, This motor will work however, it does not come with a switch. You would need to order a replacement canopy with the switch which you can view here: http://www.inyopools.com/Products7/07501352033636.htm
Reply
I am going to order this pump to replace a 2 hp motor #186022. It says it is the replacement pump for my spa.
Because it is less HP will it affect the performance of my jets and spa?
If not and I purchase it, what is the go kit that pertains to this pump?
Reply
Ben, I would not recommend going with a lower horse power. Please send us a photo of your motor label so we can confirm the correct replacement motor.
Reply
i have a starite pool pump that has a noisey pump i have attached a picture of pump info plate will this pump be the one that i need also would i need a new pump seal as well if im replacing motor the current one is not leaking.
Can you please send a side view picture of the entire pump?
Reply