Part # PL0113
Dimensions 7" L x 7" W x 25.5" D
PureLine Aftermarket Replacement Cartridge for Hayward® Swim Clear C-4520 Filter
Is your pool water starting to look a little dull? Is your pressure gauge reading a higher PSI than normal? Are your pool jets a little less powerful? These are all signs that it is time to replace your pool filter cartridge. Replace your pool filter cartridge today and regain that crystal clear pool water and extend the life of your pool pump.
Typically for single cartridge pool filters we suggest replacing your cartridge every 6-12 months and for filters which take multiple cartridges, we suggest replacing your cartridges every 3 years.
This Cartridge is Commonly Used In
PureLine Cartridge Benefits
Not Your Cartridge?
Is this not your Cartridge? Don't worry, we carry thousands of Pool Filter Replacement Cartridges to replace all of the most popular OEM brands such as Sta-Rite®, Pentair® / Pac Fab®, Hayward®, Purex®, American Products®, Jacuzzi®, Hot Springs®, Coleman®, and more. Click here for more Pool Filter Replacement Cartridges
Disclaimer:
All manufacturers’ names, brand names, trademarks, images, symbols, descriptions, and part numbers are used herein for reference purposes only.
I have a Hayward filter which requires 4 filters. Filter casing says to use either CX875RE or CX1380RE and I don't know which to order. The Hayward filter says on the housing that it is serial # 2487 and 330D32.
Reply
Your best bet will be to measure your cartridges. The CX875RE measures 25-1/2" Long and the CX1380RE will measure 32-7/8" long. We do carry both of these cartridges on our website in both the OEM and a Generic and I have listed links to each of these products below: CX875RE OEM http://www.inyopools.com/Products/07501352015358.htm CX875RE Generic http://www.inyopools.com/Products/00100000010677.htm CX1380RE OEM http://www.inyopools.com/Products/02200001004497.htm CX1380RE Generic http://www.inyopools.com/Products/06400001004498.htm
Reply
Part PL0113. Does this part replace a 9 year old Hayward part noted as C-875
Reply
Hi Bruce, Yes Part PL0113 does replace a 9-year-old Hayward part # C-875 This would be the correct replacement cartridge.
Reply
Will this replace my filters? Please see attached - It is a Hayward filter system
Hi Josh, could you send us a few photos of the entire filter label or the part numbers that should be molded onto the actual cartridge elements themselves? To supply photos simply click the reply link below and upload your photos. Once we get those photos we can make the proper recommendation.
Reply
is this item returnable if it is wrong
Reply
Hi Barbara, Yes it is. Just make sure it is in unused condition and water has not passed over it. If it did not fit you would just be responsible for the return shipping.
Reply
Less than 1 hr
Socket Set
1 0
I removed the filter top, removed the top piece and removed the four filter cartridges. I installed the new cartridges, added the goop to the rubber O-ring and re-installed the top. Saved a ton of money getting the generic filters from INYO Pools!