By Pureline


Details

Top

Model # PL1601

Warranty 1 Year

Alternate Part #'s 5014, 72744

Product Description

Same Quality as Hayward®, Pentair®, Sta-Rite®, Jandy®, Jacuzzi® & Waterway®!

The PureLine Pure Flow pool pump is one of our favorite pumps. This work-horse is designed to be energy-efficient, quiet, dependable and all of this at a great price.

Click here for 1.5" Quick Disconnect Unions for the Pure Flow Pump

Click here for 1.5" MIP, 2" Socket Long Union for the Pure Flow Pump

Click here for the Above Ground Pool Version of this Pump

Application

  • Swimming pools of all types and size (including in-floor cleaning systems, solar heating systems, water features or water garden)
  • In-ground spas or in-ground pool/spa combinations

Features

  • Self-priming (suction lift up to 6’ above water level)
  • Strainer basket cover removes easily for cleaning
  • Transparent strainer basket cover lets know when basket needs cleaning
  • All components molded of corrosion-proof reinforced thermoplastic for extra durability and long life
  • Drain plug for easy pump winterization
  • Mechanical seals are made from carborundum & graphite for long life and low noise
  • Motor shaft is stainless steel grade 304

Dimensions
PureLine Pool Pump Dimensions

Pump Curve

Disclaimer:

All manufacturers’ names, brand names, trademarks, images, symbols, descriptions, and part numbers are used herein for reference purposes only.

Product Specifications

Manufacturer:
Pureline
HP:
1.5 HP
Speed:
Single
Volts:
115/230 V
Amps:
18/9.0 amp
Port Size:
1 1/2 in.
Top

?     Asked on 6/19/2014by Guest

Will it work for an above ground pool?
 Reply

A  Answered on 6/19/2014 by InyoPools Product Specialist Patrick P.

Yes there would be no problem using this on an above ground pool.
 Reply


?     Asked on 5/30/2015by Inyo Visitor

what is the warranty on the 1.5 hp reliant pool pump and the two speed pump. Also is the reliant motor the same as the Hayward super pump
 Reply

A  Answered on 5/31/2015 by InyoPools Product Specialist Patrick P.

The warranty on this pump is a 1 year warranty. The reliant motor is made by a different manufacture than the manufacture of the Hayward Super Pump.
 Reply


?     Asked on 6/1/2015by Kathy

We have a 16 x 34 pool. Currently have a 1 1/2 HP pump which is very old. It came with the house we bought. Would this pump be big enough for that size pool.
 Reply

A  Answered on 6/1/2015 by InyoPools Product Specialist Patrick P.

Hi Kathy, Yes this pump would be large enough for your 16 x 34 pool.
 Reply


?     Asked on 6/3/2015by Kathy

Is the reliant a new or refurbished pump.
 Reply

A  Answered on 6/3/2015 by InyoPools Product Specialist Joe S.

Hi Kathy BC2744 is a brand new pump
 Reply


?     Asked on 6/13/2015by Noshir

I have a Hayward Northstar Pump, Part No. 187629.02. Is this pump a suitable replacement?
 Reply

A  Answered on 6/13/2015 by InyoPools Product Specialist Patrick P.

Hi Noshir, This pump would be a little too small for replacing a Hayward Northstar Pump. A good replacement for your Northstar would be the 1-1/2 HP Jacuzzi Magnum Pump.
 Reply


Top
Difficulty

Est. Repair Time

1 to 2 hrs

Tools Needed

Screwdriver, Nut Drivers, Pliers, Socket Set, sawsall, channel locks, wire cutter

Old pump was leaking water

Written on 11/11/2021 by Guest

1. ordered new pureline pump and quick connector unions from inyo through chat (techs very helpful)
tool old pump out (cut off breakers / removed old wiring / cut existing pvc with sawsall)
2. installed quick connectors to new pump / matched new pvc to existing setup / primed and glued all pvc.
3. connected electrical (3 wires)
4. connected quick connect unions to pump / turned on breakers / pump working great.

Were these instructions helpful? 
 

Difficulty

Est. Repair Time

Less than 1 hr

Tools Needed

Screwdriver

Burned up pump from WalMart, 11 months old !!

Written on 9/13/2021 by Guest

Replaced pump !!

Were these instructions helpful? 
 

Difficulty

Est. Repair Time

Less than 1 hr

Tools Needed

Screwdriver, Pliers, Strap wrench for unions

Old Hayward pump wore out.

Written on 8/25/2021 by Guest

Ordered the pureline pump,got it in just a few days unhooked the unions on my super pump and unwired it, the new pump fit right in by using the plumbing off old pump,took about 45 min.to plumb and wire it up worked great. The only problem was the pipe threads are not American, had to wrap a few extra rounds of Teflon tape to get a tight fit

Were these instructions helpful? 
 

Difficulty

Est. Repair Time

2 to 4 hrs

Tools Needed

Screwdriver, Socket Set, hack saw to cut and refit the PVC, and glue.

1     0

My motor was stopping irregularly due to over heating. Due to this the pump was leaking, so had to replace the whole pump and motor.

Written on 10/31/2019 by Guest

Ordered this pump at a great price and fast shipping. The only problem was the pipes on my old pump were 2 inch and the new pump was 1.5 inch.... A detail I did not realize until it arrived. I called the support team and they confirmed the change in pump size was not going to be a problem.

Were these instructions helpful? 
 

Difficulty

Est. Repair Time

1 to 2 hrs

Tools Needed

Screwdriver, Pliers

No longer functioned and was leaking.

Written on 8/15/2019 by Guest

Make sure power was off
Cut the pipe
Install new pump
Test to see if it works

Were these instructions helpful? 
 

Difficulty

Est. Repair Time

2 to 4 hrs

Tools Needed

Screwdriver, Nut Drivers, Pliers, Socket Set

My pump went out. I ordered a new pump from INYO

Written on 8/4/2019 by Guest

I received my pump by UPS. The box looked good so I did not inspect. Went to install pump and the electrical cover on the motor was damaged. I took pictures and emailed INYO requesting a new cover... no reply as of today. I installed the pump and it works fine.

It took me a few trips to the hardware store to get the right fittings but got it done. After further review of the website I saw the fittings I needed. It would have been nice for that info to be listed as a needed accessory. SO-97336 1001645 David

Were these instructions helpful? 
 

Difficulty

Est. Repair Time

1 to 2 hrs

Tools Needed

Screwdriver, Nut Drivers, Wrench Set, Adjustable Wrench

Pool Pump stopped working

Written on 7/26/2019 by Guest

I purchased a new pool pump from inyopools.com and followed the easy-to-follow installation steps provided in the website.

Were these instructions helpful? 
 

Difficulty

Est. Repair Time

2 to 4 hrs

Tools Needed

Screwdriver, Pliers, Socket Set, Wrench Set, hacksaw

14     0

My pool pump quit working.

Written on 12/27/2017 by Guest

I found great support for reviews and products at www.inyopools.com! I found a comparable pump in gallons per hour (GPH) and horsepower (HP). I selected a 1.5HP and had it shipped! Once the pump arrived, I set up to get it installed. First step is to always secure power by turning off the circuit breakers. Then, I removed the old pump by cutting the supply and return lines to the pump and disconnecting the electrical wiring. Once the old pump was out of the way, I placed the new pump in place. With it properly located, I measure the PVC pipe I would need to connect the new pump, made the appropriate cuts and prepared to assemble the pieces, which included two unions and the 1 3/4" to 2" male adapter for the pump itself. Using PVC primer and glue, I applied the primer, then the glue, to each connection working towards the pump. Once the male adapters were attached to the pump using plumber's tape, I then connected them to the rest of the PVC pipe fully connecting them in less then 20 minutes. After the plumbing was completed, I connected the wiring using the provided instructions on the inyopools.com site, which was extremely helpful! Once all connections were complete, I reapplied power and verified there were no issues. Using a 5 gallon bucket, I filled it with water from the pool, opened the filter basket on the pump itself and used the bucket to fill up the pump. Once there was water in the pump, I turned the pump on and systematically added water with the filter basket open until the pump began circulating water on it's own. I closed the filter basket lid and the pump filled completely. I bled air out of the filter system and that finished up the project! No leaks, no issues, and a pretty easy install. Great supporting documents and how-to's were provided by www.inyopools.com and made the job even easier.

Were these instructions helpful? 
 

Top

Review Summary

 (Average 4.69  out of 5 stars)
32 Rating
5 star:
 
(27)
4 star:
 
(3)
3 star:
 
(0)
2 star:
 
(1)
1 star:
 
(1)

The Most Recent Reviews