Model # PL9802
Manufacturer Code SMARTSYNC60W
Universal Control Adapter specifically designed for our Lighted LED Pool Waterfalls as well as other manufacturers' pool LED lights.
Easily synchronize multiple LED Waterfalls and the most popular pool lights and automation systems with the Smart LED Adapter. With simple installation, you can operate up to 12-feet (up to 60 watts) of waterfalls allowing you to conveniently create and control an atmosphere full of vibrant colors!
Change the color or color programs by switching the power on and off or through most pool automation systems. Set this to #1 - J Series for our LED waterfall lights.
Controls the LED lights on our Lighted LED Pool Waterfalls up to 20 feet of combined width (60 watts maximum).
Requires a 60-watt or higher 12-volt AC power transformer such as the Intermatic 100 Watt Transformer - PX100. Mount the Smart LED Adapter in a NEMA-approved weatherproof enclosure using the included mounting screws (Enclosure is not included).
Compatible with Jandy® WaterColors LED Light Controller, AquaLink® Automation Systems (RS, PDA, TCX), Pentair® IntelliBrite®, and Hayward® UCL color modes.
How many light features can we have in one controller?
And can we have other kind of led water features together with the led water fall?
Reply
Hello Cruz - The LED Waterfall Controller can control Brilliant Wonders Led Waterfalls up to 20' in combined length. For example, one controller would work for five 4' waterfalls. This is not designed for water features other than the waterfalls.
Reply
how to install the control
Reply
3. Installation and Wiring Diagram Connected to RGB module as an example Note: Ensure all wire connections and polarities are correct before applying power. Controller Mounting CMP recommends a NEMA 3 or equivalent enclosure for outdoor installations (Fig 1). For indoor installations, a junction box may also be required dependent on local codes and regulations. a. The controller is not waterproof and must be protected from the sun and rain. b. The enclosure or junction box must be installed per the National Electric Code (NEC) requirements as well as comply with any local codes and regulations c. The enclosure must be non-metallic(plastic) to ensure adequate RF signals are achieved. d. For product longevity, ensure proper ventilation where both the controller and power supply may be mounted inside the same enclosure in elevated outdoor temperatures
Reply
Can these waterfalls work with ColorLogic instead of the proprietary power/remote controls?
I want a fully integrated solution, have budget for 1 sheer descent and 2 deck jets. New install pool.
Reply
Hi, Craig. Unfortunately, the LED Waterfall can only work with this Controller.
Reply
I'm ordering a 48 inch LED waterfall light and two 24 inch Waterfall light as well as the controller. Is that all that is reqjired to make it work. What does the Sync do that the controller doesn't.
Reply
I purchased a LED waterfall with remote from INYO POOLS. I am sad to say I dropped the remote and now it is broken. I would like to buy another remote control only. Please give me a price. My number is 786-277-1268
Reply
Hi, You would require the PL9800 Remote and Controller for $249 unfortunately the remote is only sold with the controller.
Reply
The Most Recent Reviews
(5 out of 5 stars)
Reviewed By: Inyo Customer ()
Work with my waterfalls perfect sense on stalled them in 2019
Was this review helpful to you?