By Gecko Alliance
Part # 58-337-1560
Manufacturer Code BDLTSC4GE1
Dimensions 6.5" L x 5" W x 3" D
Panel, TSC-4/K-4 Lg Rec, 8-Key, Real T/C, P1, P2, Bl, Lt (TSPA) (BDLTSC4GE1)
Dimensions 3-1/4" x 7". This TSC-4/K-4 control panel will work with most TSPA systems, has 8 buttons and a Real time clock feature. It has an LCD Display and a 10ft cord. The following circuit board(s) are compatible with the above topside: 59-337-1250, 59-337-1255, 59-337-1260, 59-337-1265
My model is k-4. Option is SL-GR-ADB-NO. Serial number is 110330280. Made by Gecko. Could you tell me what controller I need to buy. I also need to know what wire I need also.
Reply
Hi Clark, The Gecko TSC-4/K 4, 8 Button Topside with Overlay will be the correct controller base off of the info you've provided. It also comes with the wire/cable.
Reply
Good morning
Iam looking for a new Gecko control panel for my spa.
The old one is Gecko Model TSC-4 , option GE-3 , serialnumber 9075403
The one I am looking at now looks very simular to my old one
Big question is : Will it do the same?
Awaiting your earliest reply,
with kind regards,
Lex Geys
Reply
Hi, Lex. This Gecko TSC-4 is the same as the older units. The topside dimensions are 3-1/4" x 7".
Reply
I have a gecko control 0200-007014 model TSC-4, serial number 010262107 that is bad. What is the replacement part number?
Reply
Hi, Clark. This Topside with Overlay - BDLTSC4GE1 is the correct replacement based on the info provided.
Reply
I need a Gecko
0200-007083
Model: TSC -4
Option: SL-AD-NO
8-Button
What is a replacement number
Thank you for your time
Reply
Hi, Philip. This TSC-4/K 4 Topside with Overlay - BDLTSC4GE1 will replace your top side.
Reply
I have old gecko tsc-5 control panel 0200-007090 made by Gecko for Baja Spa ww 1068. Whats the replacement for old 0200-007090 ?
thank you
Rafal
Reply
Unfortunately the 58-337-1560 is not correct. The topside you are after (58-355-4051 ) is NLA with no alts. You will need to replace the control system with a new topside as there is nothing that will communicate with the existing pc board.
Reply