$279.39

Qty:

By Air Supply


Details

Top

Model # A16315201

Alternate Part #'s 34-123-1515, AIR-85-8412, AS6315241, ASF6315241, ASU6315241, S152

Product Description

Silencer Spa Blower – The ultimate in quiet operation
UL listed indoor/outdoor use

  • thermally protected motor
  • exclusive acoustical antivibration motor mounts
  • includes spring check antisurge valve
  • bottom mount
  • 2" slip fitting

    Please Note: Maximum blower size for 1-1/2" pvc pipe is 1 Hp except for the Millenium blower

 

 

Click here for more Spa Blower

 

Blower Mount Type Bottom Mount
Blower Horsepower 1.5hp
Blower Voltage 230v
Blower Amperage 4.5A
Manufacturer Air Supply of the Future
Blower Model Silencer

Product Specifications

HP:
1 1/2 HP
Volts:
240 V
Top

?     Asked on 7/24/2019by Bill

What air blower do you recommend for replacing my Polaris Air blower it is a 250 volt hard wired Thank you
 Reply

A  Answered on 7/24/2019 by InyoPools Product Specialist Hector F.

I would recommend considering the silencer air blowers that you can view those and more on the air blower page here
 Reply


?     Asked on 3/28/2020by Troy

Hi, I have an old Polaris blower that is 1 HP, 240 Volts, 3.8 Amps, 1 Phase (see attached photo). Would this new Silencer 1.5 HP, 240V 4.5 Amp unit be a good replacement and hook right up without any electrical modifications? Thanks, Troy

 Reply

A  Answered on 3/30/2020 by InyoPools Product Specialist Lennox H.

Hi, Troy. Increasing the blower size can cause issues with your air and water mixture. I'd recommend that you use the Silencer Spa Blower 1 HP 240 V 2.5 Amp Hardwire - A16310201
 Reply

  • Commented on 4/1/2020 by Product Owner

    Also, it appears I’ll need to purchase a switch for the unit. Can you recommend something?
     Reply

    • Commented on 4/3/2020 by InyoPools Product Specialist Lennox H.

      Troy, There is not a switch available that is used specifically for this blower. We will need more info on how you want to operate this. 
       Reply

    • Commented on 4/3/2020 by InyoPools Product Specialist Lennox H.

      Troy, There is not a switch available that is used specifically for this blower. We will need more info on how you want to operate this. 
       Reply


?     Asked on 4/9/2020by Todd Thompson

Is this an easy install to replace a Polaris model 1-470-02

 Reply

A  Answered on 4/9/2020 by InyoPools Product Specialist Patrick P.

Hi Todd, Yes this would be an easy replacement for the Polaris model 1-470-02 Blower as shown in your photo.
 Reply


?     Asked on 3/28/2022by david

I have 2 of the Polaris Model 1-516-03 1.5 peak hp 240 volts 4 amps 1 phase. What do you have as options for replacement? Your help is appreciated.

 Reply

A  Answered on 3/28/2022 by InyoPools Product Specialist Craig C.

Hello David.  The Air Supply Silencer Blower 1 1/2 HP 240V 4.5 Amp part number A16315201 is an excellent replacement for the Polaris Model 1-516-03.     Silencer Spa Blower 1 1/2 HP 240 V 4.5 Amp Hardwire - A16315201      Attached please find a copy of the Air Supply Silencer Installation and Instruction Manual for reference.  Air Supply Silencer Outdoor Air Blower
 Reply


Top
Difficulty

Est. Repair Time

Less than 1 hr

Tools Needed

Screwdriver

Old blower seezed up.

Written on 9/24/2024 by Guest

Turn off breaker. Remove electrical plate cover on blower. Disconnect the wires and conduit.
Lift old blower off the PVC pipe. Put new blower on PVC pipe reattach the conduit and wires, and cover plate.
Turn on breaker.

Were these instructions helpful? 
 

Difficulty

Est. Repair Time

1 to 2 hrs

Tools Needed

Screw gun with nut driver.

Old unit

Written on 5/21/2017 by Guest

I disconnected the power to my pool equipment and removed the wires from the supply line on the old blower. I removed the unit from the pool plumbing by lifting the unit straight up off the pvc pipe. I decided to attach the unit to the wall of the house about 3 feet away from where it use to be. I installed bolts thru the holes provided in the housing plate and then with unions and elbows ran pvc pipe and attached it to the new blower. I wired the unit to the supply lines, turned on the power and then powered up the new blower. It performs much better then the old one. Thanks to Inyo pools for helping me choose the right unit and giving me a good price.

Were these instructions helpful? 
 

Top

Review Summary

 (Average 5  out of 5 stars)
1 Ratings
5 star:
 
(1)
4 star:
 
(0)
3 star:
 
(0)
2 star:
 
(0)
1 star:
 
(0)

The Most Recent Reviews