$27.80

Qty:

By Pureline


Details

Top

Part # GOKIT41

Alternate Part #'s ALDGO-KIT41, APCK1037

Product Description

INYOpools highly recommends replacing the shaft seal, o-rings and gaskets when replacing your motor, if you use your old shaft seal it will not mate up properly with the new pump and may leak. The best value is to go with one of INYO's tune up kits which include the shaft seal and all O-rings, gaskets and lubricant for your pump.

This Tune Up Kit Works on These Pumps:

  • Jacuzzi LR Series

Tune Up Kit Includes:

  • Lid O-Ring
  • Pump Square O-Ring
  • Shaft Seal (AS-200)
  • Lubricant

For More Pool Pump Motors

Top

?     Asked on 2/13/2012by Guest

I recently changed my pool motor and gaskets. I made sure to lubricate all the gaskets with vaseline. A few days later water is leaking from the pump. What did I do wrong? Help please!!
 Reply

A  Answered on 2/13/2012 by InyoPools Product Specialist Patrick P.

You never want to use vaseline on any rubber gaskets or o-rings. Vaseline is petroleum based and will deteriorate the rubber quickly. Whenever you change the motor on a pool pump it is recommended that you replace the gaskets and shaft seal as well. A >Go-kit contains the shaft seal, packet of non-petroleum based lubricant and gaskets you will need for your pump. If you already have the gaskets, you can purchase >Magic Lube.
 Reply


?     Asked on 10/15/2014by Guest

My pump is not priming even after cleaning impeller. Will purchasing this kit aid in fixing that problem?
 Reply

A  Answered on 10/15/2014 by InyoPools Product Specialist Patrick P.

The seal kit can help with loss of prime. I can't guarantee that it will solve your problem. The loss of prime could be from an air leak at the valves or plumbing in front of the pump.
 Reply


?     Asked on 8/31/2016by gigi

I have a Jacuzzi J370 2002. My pump leaks where the motor shaft goes into the pump. Is the kit above is the one to repair that problem?
 Reply

A  Answered on 9/1/2016 by InyoPools Product Specialist Stacey M.

Hello Gigi, If you have a Jacuzzi LR pump this GOKIT will work. if you don't have that pump then please give us the model of your pump to better assist you with parts.
 Reply


?     Asked on 5/28/2017by Phil

does this kit include the eye seal that goes in front of the impeller on Jacuzzi LR6 models
 Reply

A  Answered on 5/28/2017 by InyoPools Product Specialist Hector F.

No, this kit does not include that eye seal. That seal part number is 5062-17.
 Reply


?     Asked on 8/2/2021by Mark Johnson

My motor is leaking where the motor connects to the Strainer Case, probably from the motor shaft area. This happened several years ago and I got a kit with I believe a compression seal that in order to replace it I had to grip the shaft with pliers and remove the impeller. Is this that same kit? Also, how do I tell which kit it is based on a motor Model S55NXPEB-7537.

 Reply

A  Answered on 11/10/2021 by InyoPools Product Specialist Stephen B.

Thank you for contacting Inyo Pools, The correct seal kit is Tune Up Kit Jacuzzi LR & SLR Series - GOKIT41
 Reply


Top

Review Summary

 (Average 4  out of 5 stars)
2 Rating
5 star:
 
(1)
4 star:
 
(0)
3 star:
 
(1)
2 star:
 
(0)
1 star:
 
(0)

The Most Recent Reviews