Part # GOKIT1
Standard tune up kit for the Hayward Max-Flo pump includes the shaft seal and all o-rings, gaskets and lubricant.
We highly recommend replacing the shaft seal, o-rings and gaskets when replacing your motor. If you use your old shaft seal, it will not mate up properly with the new motor and may leak.
This Tune Up Kit Works on These Pumps:
Tune Up Kit Includes:
Click here for Saltwater Pool Tune Up Kit (GOKIT1SALT)
For More Pool Pump Motors
Does the motor and kit come with any instructions on how to change the motor on my pump?
Reply
The motor comes with a wiring diagram but here is a more detailed document on how to replace the motor, look under the section labeled seal change instructions. http://www.inyopools.com/owners_manual/hayward_pumps_inground_max-flo.pdf
Reply
I recently changed my pool motor and gaskets. I made sure to lubricate all the gaskets with vaseline. A few days later water is leaking from the pump. What did I do wrong? Help please!!
Reply
You never want to use vaseline on any rubber gaskets or o-rings. Vaseline is petroleum based and will deteriorate the rubber quickly. Whenever you change the motor on a pool pump it is recommended that you replace the gaskets and shaft seal as well. A >Go-kit contains the shaft seal, packet of non-petroleum based lubricant and gaskets you will need for your pump. If you already have the gaskets, you can purchase >Magic Lube.
Reply
My pump is not priming even after cleaning impeller. Will purchasing this kit aid in fixing that problem?
Reply
The seal kit can help with loss of prime. I can't guarantee that it will solve your problem. The loss of prime could be from an air leak at the valves or plumbing in front of the pump.
Reply
I am looking for parts for my Hayward max flo ll The parts i need are (Hayward oem parts in parentheses) (GMX600F) Housing O Ring (SX220z2)Diffuser O ring and (SPX 2700s a) Shaft seal assembly. I would like to know if your tune up kit hayward maxflo are the same parts I am describing If so I would like to order it. Could you please let me know if these are the parts I need? Thank you
Reply
David, The GOKIT1 will not work with the MaxFlo II pump. The tune up kits are not made by Hayward so they are not OEM. We do carry parts for the MaxFlo II.
Reply
Less than 1 hr
Screwdriver, Socket Set
1 to 2 hrs
Screwdriver, Nut Drivers, Socket Set, wire cuters with wire stripper
2 0
This was my first time installing a pool pump motor. What I did was remove and replace the motor and change out the old seals. When installing new seals I used the included seal lub. After installing motor I checked it out and looked for leaks. I took my time and was finished in less than a couple of hours. I did need to change out some house to motor electrical connections to get a better electrical contact, but all together it was a easy job.
The Most Recent Reviews
(5 out of 5 stars)
Reviewed By: Inyo Customer ()
Great value
Was this review helpful to you?
(5 out of 5 stars) Hayward Tune-Up Kit
Reviewed By: Inyo Customer ()
Awesome product. The kit contained everything needed to tune-up your pool pump. A definite necessity to eliminate future pool pump problems.
Was this review helpful to you?
(5 out of 5 stars)
Reviewed By: Inyo Customer ()
nice kit
Was this review helpful to you?
(5 out of 5 stars) Worked great with our motor
Reviewed By: Inyo Customer ()
Worked great with our motor
Was this review helpful to you?
(5 out of 5 stars) Correct parts
Reviewed By: Inyo Customer ()
Exact parts i needed plus very good how to replace instructions.
Was this review helpful to you?
(5 out of 5 stars) Worked Well!
Reviewed By: Inyo Customer ()
Worked well!
Was this review helpful to you?
(5 out of 5 stars) Five Stars
Reviewed By: Inyo Customer ()
Five Stars
Was this review helpful to you?
(5 out of 5 stars)
Reviewed By: Inyo Customer ()
good reliable parts
Was this review helpful to you?
(5 out of 5 stars)
Reviewed By: Inyo Customer ()
YES YES YES
Was this review helpful to you?
(5 out of 5 stars) Seal replacement with new pump motor
Reviewed By: Inyo Customer ()
This was my first time installing a pool pump motor. All I did was remove and replace the motor and change out the old seals. I took my time and was finished in a couple of hours. I did need to change out some motor electrical connections, but all together it was a easy job.
Was this review helpful to you?
(5 out of 5 stars)
Reviewed By: Inyo Customer ()
Super easy to install
Was this review helpful to you?
(5 out of 5 stars) MaxFlo repair
Reviewed By: WES50 from Leonardtown, Md ()
Pros: Straight forward easy to use.
Cons: None
MaxFlo pump was dripping water. The kit came with all the parts required to refurbish pump.Also reviewed Inyo info guides online which was extremely helpful.
Was this review helpful to you?
(5 out of 5 stars)
Reviewed By: Steven r M. from Orange County, CA ()
Pros: finally works
Cons: Packaging doesn't say a word about NOT TOUCHING THE CERAMIC PARTS of the Motor Seal.
The gaskets were great but the motor seal really needs to have a warning on the packaging, tell the user NOT TO TOUCH the ceramic parts with your hand. It is ridiculous to think everyone is going to watch every video inyo pools has, to hear not to touch the ceramics.
Was this review helpful to you?
(4 out of 5 stars) Great product
Reviewed By: Allen M. ()
Easy to install
Was this review helpful to you?
(4 out of 5 stars) Awesome Seal Replacements
Reviewed By: RonM from Hollywood, FL ()
This product is a good all-in-one package that helps you tune up your motor replacement and pump. All the seals fit perfectly.
Was this review helpful to you?
(5 out of 5 stars) tune up kit
Reviewed By: Robert H. from kingsport tn ()
Pros: ease of use
Cons: none
it's a "got to have" when replacing the electric motor or the pool.
Was this review helpful to you?
(5 out of 5 stars) Tune up kit
Reviewed By: Hot tub from Elk River, MN ()
I haven't completed the replacement yet as I need to place one more order, but these part look to be a perfect fit.
Was this review helpful to you?
(5 out of 5 stars) motor seal kit
Reviewed By: John M. from dallas, tx ()
Not sure I needed this kit but glad I ordered it, some seals definitely needed replacement
Was this review helpful to you?
(5 out of 5 stars) Seals were as described
Reviewed By: Johnny5 ()
This seal package was used to replace old seals on my Hayward pump when I placed a new motor on it. They were the correct size and work fine.
Was this review helpful to you?
(5 out of 5 stars) everything you need in one package
Reviewed By: Sal M. from port saint lucie florida ()
Pros: everything you need for a successful repair
Cons: none
Was this review helpful to you?
(5 out of 5 stars) must have when replacing pump motor
Reviewed By: WALTER W. from WEST PALM BEACH, FL ()
Pros: even comes with lube
Cons: none
should also replace the impeller also for a complete pump rebuild
Was this review helpful to you?
(5 out of 5 stars) Perfect tune up kit.
Reviewed By: Steve K. from Fort Myers, FL ()
Pros: Everything in one package.
Tune up kit worked perfect and delived in one day.
Was this review helpful to you?
(5 out of 5 stars) Just what I needed for the job
Reviewed By: FRANK P. from MELBOURNE BEACH, FL ()
Pros: Excellent Service--Quick delivery
Cons: none
The parts break down chart helped me identify exactly what parts I needed
Was this review helpful to you?
(5 out of 5 stars) gaskets for pool motor
Reviewed By: bobbybee from sebastian florida ()
Pros: customer service extremely helpful
Cons: none
Was this review helpful to you?