By Pureline


Details

Top

Part # NEP2133

Alternate Part #'s 647304071, PL0774, PO11400V

Product Description

6 Way Valve for NE6150 / NE6170 Filter

Top

?     Asked on 6/29/2015by Leon Fast

I have this valve, I need a new decal for the top so I can read it. How can I get one?
 Reply

A  Answered on 6/30/2015 by InyoPools Product Specialist Lennox H.

Hi Leon, Replacement part are not available for the NE6170 Filter 6 Way Valve.
 Reply


?     Asked on 3/10/2016by Steve

I have a 22" sand filter from namco from the early 2000"s, will this fit?
 Reply

A  Answered on 3/11/2016 by InyoPools Product Specialist Lennox H.

Hi Steve, If you can provide us with the model of the Namco filter that you have, we can verify if this valve will work.
 Reply


?     Asked on 6/4/2016by Eric

I just need a replacement spider gasket for the 6 way valve. Can I order an individual gasket without ordering the entire valve?
 Reply

A  Answered on 6/5/2016 by InyoPools Product Specialist Alan M.

Hi Eric, Replacement part are not available for the NE6170 Filter 6 Way Valve.
 Reply


?     Asked on 6/9/2016by Evelise

Will you please provide a picture of the complete decal for the 6 way valve for NE6170 filter so I can see how to mark mine, since replacement parts are no longer available? Thank you!
 Reply

A  Answered on 6/9/2016 by InyoPools Product Specialist Patrick P.

Hi Evelise, Here is the Valve Decal for the NE6170 Filter
 Reply


?     Asked on 6/11/2016by Anthony

I recently bought a used above ground pool with this blue wave system. In order to move it I had to take all the silica sand out of the filter, how much sand has to go back in? It's a 18"-22" system
 Reply

A  Answered on 6/11/2016 by InyoPools Product Specialist Patrick P.

Hi Anthony, A general rule of thumb is to fill the filter tank up no less than 1/2 full with sand but not more than 3/4 full.
 Reply


Top
Difficulty

Est. Repair Time

Less than 1 hr

Tools Needed

Screwdriver, Pliers

1     0

Leaking/cracked valve

Written on 3/23/2021 by Guest

Replaced easy with simple instructions .

Were these instructions helpful? 
 

Difficulty

Est. Repair Time

Less than 1 hr

Tools Needed

Screwdriver

6 way valve handle was broken

Written on 6/9/2019 by Guest

Unscrewed the 2 screws on both sides of the bracket holding valve. Pulled valve off stem inside filter. Put new 6-way valve on stem. Put bracket on base of valve. Tightened both screws on bracket.

Were these instructions helpful? 
 

Difficulty

Est. Repair Time

Less than 1 hr

Tools Needed

Screwdriver, Pliers

2     1

The 6 way valve seal was leaking.

Written on 7/4/2017 by Sherrie W.

First I removed the hoses.then i removed the ring seal.pulled out the valve.removed the pressure gauge . Put the new valve on.put the ring seal on.put the hoses back on installed the pressure gauge into hole.done turned it on Wa la done.works perfectly.

Were these instructions helpful? 
 

Top

Review Summary

 (Average 4.5  out of 5 stars)
2 Rating
5 star:
 
(1)
4 star:
 
(1)
3 star:
 
(0)
2 star:
 
(0)
1 star:
 
(0)

The Most Recent Reviews