$266.54

Qty:

By Fiberstars


Details

Top

Part # Y206000

Dimensions 8" L x 5" W x 5" D

Alternate Part #'s Y20-6000, 57-259-1020, FIBY20600, FST-301-3128, FSY206000, SSRY206000

Product Description

Top

?     Asked on 4/22/2015by brent

How many watts is this bulb?
 Reply

A  Answered on 4/22/2015 by InyoPools Product Specialist Lennox H.

Brent, This bulb is 150 watts
 Reply


?     Asked on 6/1/2015by Inyo Visitor

the colors are not showing up as clearly as they were when new. the light w/color wheel was installed in 1999. Do I need a new bulb or a new color wheel or both?
 Reply

A  Answered on 6/2/2015 by InyoPools Product Specialist Patrick P.

I would first start off of with a new lamp assembly, if you did not see an imrovement after that replacement then the next thing I would try is the color wheel.
 Reply


?     Asked on 6/9/2015by MIKE

Hi, I have a fiberstars 6004 on my pool, I need a replacement bulb, do you sell them or know a reputable place I could order one from? thank you.
 Reply

A  Answered on 6/9/2015 by InyoPools Product Specialist Patrick P.

Hi Mike, the bulb by itself cannot be changed on the Fiberstars 6004 illuminator. You would require the bulb assembly on this page which we have in stock and could ship out right away.
 Reply


?     Asked on 7/6/2015by Rick

My 6008 pool light powers on but the bulb on the inside of the unit doesn't light nor does the light in the pool.
 Reply

A  Answered on 7/14/2015 by InyoPools Product Specialist Lennox H.

Hi Rick, You will have to contact S.R. Smith at 1.800.824.4387 to troubleshoot where the issue is, whether the bulb needs to be replace or another issue could be causing the issue.
 Reply


?     Asked on 7/19/2015by Inyo Visitor

Lamp assembly flickers but will not come on
 Reply

A  Answered on 7/21/2015 by InyoPools Product Specialist Joe S.

Lamp "Restrike" When turning the system off and then turning it immediately back on, it may take 1 to 3 minutes before the lamp comes back on. This process allows the lamp to cool down and then restart. This is a normal function of the Metal-Halide lamp system that the Fiberstars 6004 / 6004-AS illuminator uses.-THE UNIT SHUTS OFF AFTER A FEW MINUTES THEN COMES BACK ON Check to see if the air vents are blocked. Refer to the above drawing to make sure the vents are clear Turn off the power and remove the two screws securing the cover and check for an obstruction in the cooling fan
 Reply


Top
Difficulty

Est. Repair Time

Less than 1 hr

Tools Needed

Screwdriver

Light bulb burned out

Written on 8/12/2020 by Guest

Took off the cover and replaced the lighting assembly

Were these instructions helpful? 
 

Difficulty

Est. Repair Time

Less than 1 hr

Tools Needed

Nut Drivers, Socket Set

Light burned out

Written on 3/1/2017 by FIOREt

Took old out and put new in. Only problem was it did not tell me to restart the entire unit.

Were these instructions helpful? 
 

Top

Review Summary

 (Average 4.88  out of 5 stars)
8 Rating
5 star:
 
(7)
4 star:
 
(1)
3 star:
 
(0)
2 star:
 
(0)
1 star:
 
(0)

The Most Helpful Review


The Most Recent Reviews