$1,154.73
By Intermatic
Model # PE1501RC
For pool/spa combinations or pool/water feature combinations, the PE1541RC includes a PB313E one circuit electronic timer for controlling the filter pump, two PE24VA valve actuators, Wireless Panel Mounted Transceiver PE650 and Hand-Held Transceiver PE950, which allows the system to display the status of each of the four on-demand circuits, pool and spa water temperature, pool and spa thermostat set point, heating status and overall communication status. PE1501RC does not include actuators and is designed for pool or spa applications
Model Overview:
• One timed circuit for filter pump
• Controls up to five loads
• Two separate actuator circuits
• Heater thermostat control for pool & spa
• 100 Amp circuit breaker bus
• Optional relay for booster pump circuit
• 120 VAC & 240 VAC capabilities
• Approved direct connect for lights
• Z-Wave® wireless transceiver
Accessories:
PE24VA - Intermatic Valve Actuator
PA120 - Intermatic Double Pole Single Throw Relay with 24VAC Coil
143T145A - Intermatic Relay DPST 24VDC
PA118 - Antenna for PE950
PA121 - Intermatic 35' Antenna Extension
PA122 - Intermatic Water Temperature Sensor
PE650 - Intermatic I-Wave Wireless Base Reciever
PE953 - Remote, Wireless Hand-Held Transceiver
PB313EK - Intermatic Digital Timer Replacement Kit w/ Wire Leads
Will I need to purchase any other accessories?
Reply
Hi, Bill. This model is no longer available, it has been replaced with the Intermatic Multi Wave Wireless Pool and Spa 80amp with 2 actuators - PE35065RC.
Reply
Will my existing actuators(2), Hayward work with this Intermatic Control Panel or do I need to purchase the Intermatic Actuators?
Reply
Hi, Bill. Your Hayward actuators are not compatible with the Intermatic controller. I would recommend the Intermatic Multi Wave Wireless Pool and Spa 80amp with 2 actuators - PE35065RC. The only thing that you will need is the breakers for the knockouts.
Reply
