Part # 4717
Jandy 3-Way Never Lube Valve
Technical Details
Question on the 2" jandy 3 way valve. What are the connections. Are they all female socket 2", or are any outlets reduced in size or a male connection. Please advise. Thanks
Reply
For the 4717 you can attach it to your plumbing two different ways. You can take 2" piping and have it fit inside the valve (so the valve would be female) or you can take a 2 1/2" pipe and fit it over the valve (so the valve would be male).
Reply
I just bought a house with a pool. i'v never had a pool so my question is when the pump comes on automaticaly (it has a timer)what position is the jandy valve supposed to be turned to the main drain or skimmer?
Reply
You can turn the valve so that all the suction is going to the drain at the bottom of the pool, this will suck any dirt or debris on the bottom of the pool through the drain and clean through the filter. If you turn the valve so the suction is going to the skimmer then you will be pulling any leaves or debris off the surface of the pool. You can also set the valve in a half way position so you are pulling from both the skimmer and main drain. I hope this helps.
Reply
Why do the Jandy valves list ID and OD for each valve?
Reply
Each Jandy valve is designed to connect to two different size pipes. For example on a valve shown with ID 1 1/2" and OD 2", a 1 1/2" pipe can be glued inside the port or a 2" pipe can be glued on the outside of the port.
Reply
I have this valve installed at my pump. I have a lot of air coming out of the pool jets and it doesn't stop. If I rotate the valve to vacuum and back to skimmer, it clears the air immediately. Do you have any suggestions?
Reply
I would recommend checking the gaskets/o-rings on the valve and pump housing. They may be letting air into the system.
Reply
The Most Helpful Review
5 0
(5 out of 5 stars) Jandy Valve
Reviewed By: Krazydoc from Anthony, NM ()
Pros: Eaxctly as described
Cons: None
I needed a replacement for some internal parts and the Inyo Pool price for the ENTIRE valve was less than the total for the indiidual parts!
Was this review helpful to you?
The Most Recent Reviews
(5 out of 5 stars)
Reviewed By: Inyo Customer ()
nice durable body.
Was this review helpful to you?
(5 out of 5 stars)
Reviewed By: Inyo Customer ()
Works great.
Was this review helpful to you?
(5 out of 5 stars)
Reviewed By: Inyo Customer ()
It comes with the lable and easy to turn it
Was this review helpful to you?
1 0
(5 out of 5 stars) Diverter valve
Reviewed By: Inyo Customer ()
This is the best valve for the propose of selecting water routing.
Was this review helpful to you?
(5 out of 5 stars) Jandy Valves
Reviewed By: Ron G. from San Jose, CA ()
The Jandy neverlube valves are great. Easy to install, made from heavy duty material. Got our pool back up and running. Inyo's pricing is far better than our local pool supply store.
Was this review helpful to you?