Part # B853
Warranty 1 Year
Manufacturer Code B2853
Dimensions 12" L x 7" W x 10" D
Century B2853 Details:
1 HP Up-Rate Motor, 1.25 S.F., Voltage 115/230, Max Amps 115V = 13.2 230V = 6.6, Single Speed, RPM = 3450, Frame = 56Y Used on many Sta-Rite, Pac-Fab, American Products and Pentair swimming pool pumps.
Commonly Used On
Note: NOT California or New York Title 20 Compliant.
California and New York Title 20 Compliant Option:
What is Service Factor?
Reply
Service Factor(SF) is a multiplier that when multiplied by the horsepower of the motor indicates the total permissible horsepower loading that may be carried when the motor is operating at rated voltage and frequency. The most important thing to remember when replacing a motor is that the replacement motor's horsepower times its service factor must be equal to or greater than the original motor's horsepower times its service factor. The Service Factor rating can be found on the motor label. See Step 4 of our How to Read a Pool Motor Label guide.
Reply
Why do I need to purchase a new shaft seal?
Reply
We strongly recommend replacing the shaft seal. The purpose of a shaft seal is to prevent water from running down the shaft of the motor and into the motor housing. Water will damage the bearings and cause the motor to fail. A new shaft seal should be installed whenever a motor is replaced. The motor manufacturer can deny the warranty if the motor fails to due to water damage from a faulty shaft seal. To find your shaft seal you will need to visit our Pool Pump Parts Page or the Spa Pump Parts Page and select your make and model.
Reply
Why should I purchase a Tune Up Kit?
Reply
A Tune Up Kit includes all of the essential replacement seals and gaskets for the pump. The seals and gaskets should be replaced when installing a new motor on your pump. New seals will prevent the pump from leaking water or losing the prime. A Tune Up Kit will protect your motor and ensure that the pump is working efficiently.
Reply
I am changing out a my b853 motor for a B2853 motor. Is there a difference in the connections?
Reply
This is the same motor there will be no difference in the connections. The B853 and B2853 are simply alternate part numbers for the same motor.
Reply
IS this a reversible motor. I bought it new, installed it to pump. primed the pump, but it still does not pull water. Checked all the seals, etc.
Reply
A single phase motor such as this will only spin in one direction. A three phase has the ability to be wired incorrectly and spin the wrong way. Please check to make sure the impeller is clear of any debris and the pump back lid is secured and the o-ring beneath is lubed properly. It sounds more like an air leak than a motor issue.
Reply
Less than 1 hr
Screwdriver, Socket Set
1 0
INYOPOOLS helped me identify the exact motor replacement, shipped it fast, and then I watched your online videos and I was able to replace the pump motor myself without any trouble at all. Thank you, saved me a fortune with DIY instructions!
Less than 1 hr
Wrench Set, Adjustable Wrench, O ring pick
2 to 4 hrs
Screwdriver, Pliers, Socket Set, Wrench Set
1 0
1 to 2 hrs
Screwdriver, Socket Set, Wrench Set
1 to 2 hrs
Nut Drivers, Socket Set
I replaced the old one with this new motor following a YouTube video. it was not difficult at all. It run very quiet, but the pump was not pumping at all. After a while, I noticed there was a leak. I dissembled motion from the pump, and found that the seal plate had been damaged(something melted around the shaft hole). Now I am shopping for that seal plate, I am not sure which one is the right one between C203-193P or C203-194P
Less than 1 hr
Screwdriver, Pliers, Socket Set, Wrench Set, Adjustable Wrench
1 to 2 hrs
Screwdriver, Socket Set
2 1
Turned breakers off
Removed ground from old motor
Removed wiring from from old motor connections (3 wires)
Removed major nuts from the where the motor and pump meet (8 bolts)
Removed another 4 bolts to replace the seal.
Did not need new O ring's or gasket
Attached the unit back to the new motor
Followed same directions in reverse to attach the new motor to pump and elec wires and ground
Turned on breaker and filled pump basked with water and turned the switch and all working well
1 to 2 hrs
Screwdriver, Nut Drivers, Socket Set
5 0
To replace the motor, the pump must be removed with the motor attached, then the pump inlet cover and impeller must be removed. Then the motor removed from the pump plate. Remove the pump seals. Remove the power cable from the pump. Attached wires to the new pump. Attach the pump plate. Install new seals. Install impeller, inlet cover. and reattached to pump filter housing. Voila!
1 to 2 hrs
Screwdriver, Nut Drivers, Pliers, Socket Set
3 1
I purchased a new motor that fit my pentair challenger pump assembly. I received the motor quickly and was able to swap the motors at a fraction of the cost that a pool company would have charged. Up and running in a hour and a half.
Less than 1 hr
Screwdriver, Pliers, Socket Set
1 0
I always start any repair (especially one I haven't done in a while) by searching online with Google. It's amazing how much information, especially you tube videos are available. First I searched for troubleshooting. When I turned the motor on manually, it was noisy and shut down after 5-8 seconds. A bad capacitor could have caused the shutdown, but the noise told the motor was bad. It has been several years since I replaced the motor, and since I save so much money shopping online online, my next step was to find a seller. Inyo Pools was priced right ($50 savings from a store) and also offered a wealth of information. What I neglected to do was to dissemble everything to insure I didn't need anything other than the motor. In fact, the copper ring and the 0-ring on the difuser were also worn out and could have been ordered with the motor. So, other than the delay in 2 orders, everything went well replacing the motor. Don't forget to clean every part and lubricate all rubber o-rings with silicone.
4 to 8 hrs
Screwdriver, Pliers, Socket Set, Wrench Set
1 0
I watched a couple different videos on YouTube to get enough information and some tips on what to do and what not to do.
Power was turned off at the breaker box.
Took a photo of the connections at the timer box and disconnected the wires.
Removed the clamp that holds the two sections of the pump together and separated them.
Once the pump is apart get it up on a surface where you can easily work. First unscrew the impeller cover, then unscrew the impeller, then disassemble the motor half of the pump. Keep track of the order of all the parts on the shaft.
Once you’ve got the housing and motor half of the pump off, assemble it to the new motor, reversing the order you have just performed. Be sure to use new seals for your task during reassembly. Keep all seals properly greased and clean during reassembly.
Once you are satisfied that you have successfully completed the assembly, attach the wires to the back of the motor and bring the two halves of the pump back together. Before rejoining the 2 halves, make sure you have thouroghly cleaned and heavily grease the seal and surfaces that meet.
Reconnect your wires to the timer box and you should be good to go. Silence is golden!!
Less than 1 hr
Screwdriver, Nut Drivers, Socket Set
1 1
Less than 1 hr
Screwdriver, Pliers, Socket Set
1 0
The Most Recent Reviews
(5 out of 5 stars) Excellent Motor
Reviewed By: Chip from Valrico, FL ()
Pros: Quiet
Installed easily. This motor is quiet and functions perfectly. I am very pleased with this replacement motor and trust it will last another 10 years as did its predecessor.
Was this review helpful to you?
(4 out of 5 stars) Great Value
Reviewed By: Thomas C. from Wilmington, NC ()
Great value for a replacement motor. Very quiet.
Was this review helpful to you?
(5 out of 5 stars) Great Replacement Pump Motor
Reviewed By: Richard N. from Poolesville, MD ()
Pros: Simple Installation, easy bolt up to old pump, super quiet operation
Cons: None
I called INYO Pools and told em what I had, they supplied this motor as a replacement for our old, noisey, dying pump motor. What a relief- simple installation, easy wiring, plugged right in- an exact fit. Runs so quiet you can barely hear it. Moves the water without effort. Runs both our pool and spa. An excellent buy at an excellent price- I highly recommend this motor.
Was this review helpful to you?
(5 out of 5 stars) great replacement pump
Reviewed By: Joe T. from salisbury , MD ()
I ordered this to replace a worn out faulty pump, it arrived on time and was not complicated to install, I also ordered the tune up kit which I would suggest to anyone doing a repair/replacement. It works great and saved me a bundle!
Was this review helpful to you?
(5 out of 5 stars) good pump
Reviewed By: Joe T. from salisbury , MD ()
Pros: easy install
I ordered this as a replacement unit and it works great! Installation was simple and straightforward. Saved me lots Of time and money.
Was this review helpful to you?
(5 out of 5 stars) AO Smith 1 HP 56Y Frame Motor
Reviewed By: Salvador Delatorre from Houston, TX ()
Excelent price and fast delivery. I will recommend this site to my friends.
Was this review helpful to you?
(4 out of 5 stars) Replacement pump
Reviewed By: Myra R. from Seneca, KS ()
I was pleased in how quickly our order was filled and delivered. Our old pump was making a lot of noise and about ready to give out. We have this replacement ready now so when we need to make the change we can. It was easy to figure out the one we needed from all that were listed.
Was this review helpful to you?
(4 out of 5 stars)
Reviewed By: Gregory S. from Bentleyville, PA ()
When I called in the order the staff helped me find the right replacement motor which is working fine. The video and text which were available on their website showed how to replace the motor and seal and were very valuable information.
Was this review helpful to you?
(5 out of 5 stars) pump matched up perfectly
Reviewed By: JEFFREY S. from Lk Mary, Fl. ()
Pros: easy to install
pump matched up perfectly,packaging was excellent,it was shipped fast,install manual was informative
Was this review helpful to you?
(5 out of 5 stars) a o smith pool pump motor
Reviewed By: Danny M. from Green Cove Springs Fl ()
this motor was exactly like the original and was very easy to install
Was this review helpful to you?
(5 out of 5 stars) pump motor
Reviewed By: Tommy from Enid, OK ()
Pros: original fit
Cons: none noted
Quiet operation and original fit. Exactly what I needed.
Was this review helpful to you?
(5 out of 5 stars) Great motor
Reviewed By: Herm from Nashville TN ()
Pros: Great Service
Cons: NA
Was this review helpful to you?
(5 out of 5 stars)
Reviewed By: Kelley ()
Pros: Easy to install
Cons: Leaked at first
It is a great motor. The reason it leaked is because we installed the seal shaft backwards..which is actually possible and it looks correct! Once we installed the seal shaft properly, it worked great. Thanks! :)
Was this review helpful to you?
(5 out of 5 stars) Works Great and well built
Reviewed By: StarMind from Powder Springs, GA ()
Pros: Went in easy and works great
Cons: None
It is a Pump motor and it installed easy and works great. The construction apears to be improved over the Original.
Was this review helpful to you?
(5 out of 5 stars) Best price and value period!!
Reviewed By: Hawkeye from Covington, LA ()
Pros: Best product and price on the net
Cons: None
Great experience to do business with!!!
Was this review helpful to you?
3 1
(5 out of 5 stars) Great reliable motor
Reviewed By: KZokey from Dallas, TX ()
Pros: Reliable, Quiet
Cons: None
This is the same motor as my original one, which worked well till the bearings worn out and started making loud noise. This motor is quiet and powerful yet pretty small.
Was this review helpful to you?
(5 out of 5 stars) Installation was quite easy, motor is quiet.
Reviewed By: handyman from Scottsdale, AZ ()
Pros: Fit nicely, runs quiet
Was this review helpful to you?
(5 out of 5 stars) Great pool pump moatar
Reviewed By: moeshaikh from santa cruz, ca, ()
Exlcellent working very good
Was this review helpful to you?
(5 out of 5 stars) I do not know anything about my warranty
Reviewed By: frank305 ()
All is OK , but I do not know anything about my warranty
Was this review helpful to you?
44 6
(5 out of 5 stars) Pool Filter Motor
Reviewed By: DreamBigGoGreen from Bowie, Maryland ()
Pros: Customer service, shipping time, price and product
Cons: None that I can think of
Best of all is the wonderful customer service help provided by Inyopools. The product was here in the time specified and the price was considerably less than the 5 other companies I checked with first. The product was as specified and ordered and hasn't given me any problems to date. It was installed about a month ago.
Was this review helpful to you?