By Pentair Pool Products


Details

Top

Part # NA408

Manufacturer Code 69100000

Dimensions 7" L x 4" W x 3.75" D

Alternate Part #'s 3019853, 69100000, 57-110-1456, AMP-301-9853

Product Description

This is the replacement light bulb for the Pentair Aqualuminator above ground pool light.  Rated at 3,000-hour bulb life. Bulb comes with o-ring as pictured. 

Aqualuminator Lens Cover Kit (Blue and Green) is sold separately.

Top

?     Asked on 6/16/2012by Guest

Can I replace the bulb with water above the return? Do I have to drain the water so it is below the return?
 Reply

A  Answered on 6/16/2012 by InyoPools Product Specialist Patrick P.

Page 5 of the Aqualuminator owner's manual here http://www.inyopools.com/manuals/365/pentair_lighting_aqualuminator.pdf gives detailed instructions on how to replace an Aqualuminator bulb. Per the owner's manual it states that "It is desirable to reduce the water level to the lower edge of the flow director. This makes bulb assembly replacement easier, but it is not mandatory."
 Reply


?     Asked on 5/26/2015by bob lane

how do I replace a bulb & gasket on my aqua laminator pool light
 Reply

A  Answered on 5/26/2015 by InyoPools Product Specialist Lennox H.

Bob, You can find the relamping instructions on page 5-6 of the Aqua Luminator owner's manual.
 Reply


?     Asked on 6/29/2015by Rick

Is there a temperature rating for this bulb? My pool is heated and the water temp coming through the return can be upwards of 95 degrees Fahrenheit. Would this be an issue with the seal on the bulb?
 Reply

A  Answered on 7/1/2015 by InyoPools Product Specialist Lennox H.

Hi Rick, I looked through the Pentair Aqualuminator Owner's Manual and did not find any information that states a maximum temperature, just a temperature for freezing conditions. You can call Pentair at 1.800.831.7133 to verify.
 Reply


?     Asked on 5/23/2016by Randy

I'm replaceing the bulb, what's the differences between the aqualuminator bulb assy. Pn 69100000 and bulb assy. Pn 61949 AQL 500, insturctions say they are not interchangeable.
 Reply

A  Answered on 5/28/2016 by InyoPools Product Specialist Alex V.

Randy, The connections on the end of the bulb are different. Please be sure to order the correct replacement.
 Reply


?     Asked on 3/28/2018by Bob

I just need the rubber o-ring need the part number for this kind of light
 Reply

A  Answered on 3/28/2018 by InyoPools Product Specialist Hector F.

Please click here to view the parts diagram for the light. Key number 3 looks to be the o ring. 
 Reply


Top
Difficulty

Est. Repair Time

Less than 1 hr

Tools Needed

None

Old light was burnt out

Written on 9/21/2020 by Guest

Very quick on shipping it!! Exact fit.

Were these instructions helpful? 
 

Top

Review Summary

 (Average 4.84  out of 5 stars)
12 Rating
5 star:
 
(10)
4 star:
 
(2)
3 star:
 
(0)
2 star:
 
(0)
1 star:
 
(0)

The Most Recent Reviews