Part # 5663A
Manufacturer Code 67-209-903-SS
INYO# 5663A DIVING BOARD MOUNTING KIT APPLICATION: COMMERCIAL DIVING BOARD MOUNTING KIT FOR DIVING BOARD PLATE THAT MEASURE 16 1/2" (.44M) IN WIDTH BOLT HOLE DIMENSIONS ARE 12" CENTER HOLE TO CENTER HOLE INCLUDES THE FOLLOWING" TOP MOUNTING PLATE BOTTOM MOUNTING PLATE (QTY OF 2) RUBBER MOUNTING PADS (QTY OF 2) 1/2" X 5" CARRIAGE BOLTS (QTY OF 2) 1/2" LOCK WASHER (QTY OF 2) 1/2" HEX NUT (QTY OF 2) 1/2" PLASTIC PROTECTIVE CAP
I need to order the 18" commercial Mounting Kit above, but I wanted to ask about another thicker rubber piece that went under the board at the top (closest to the edge of the pool) that is bolted to the mount bars. It doesn't attach to the board itself, but protects the underside of the board when it bounces down after a dive. Is that a piece that you can order separately and do you carry it? Thanks for your help. Ann Bankes
Reply
Hi Ann, What you're describing is called a Fulcrum. This item is specific to the diving board base. If you can provide the manufacture and model base you have we can find out if their is one for the model base that you have.
Reply
Do you have an exploded view as to how the parts in this kit are attached in relation to the diving board and the fulcrum. Thanks.
Reply
We do not have an exploded diagram or manual for the assembly of the diving board. I would recommend contacting S.R. Smith at 1-800-824-4387.
Reply
Can I just get the rubber mounting pads?
Reply
Hi yes we do carry this under part# 08-501 16.75" RUBBER MOUNTING PAD
Reply
