1. Home
  2. Pool Parts
  3. Pool Pump Parts
  4. Jandy PlusHP Original PHP and PHPU Series Pump (Pre-2005)
  5. 5020-062

$19.45

Qty:
 ADD TO CART

Details

Top

Part # 5020-062

Manufacturer Code G-413

Dimensions 7.5" L x 9.5" W x 0.15" D

Alternate Part #'s 07-5247, 223366, 357102, 5074-09A, 5074-09B, 5074-10A, 64640, G-413, R0555900, SPG-601-1044, AEQG413, APCG3334, PEN357102Z

Product Description

This is a volute gasket used on the Pentair IntelliFlo-VF, IntelliFlo-VS + SVRS, IntelliFlo-VS 3050, Triton Whisperflo pumps.  It is also used on the Jandy JHP and PHP pumps.

This molded gasket was introduced with the re-design of the seal plate in June 1994.

Frequently Bought with Volute Gasket

Magic Lube Gasket Lubricant

Top
Ask A Question

?     Asked on 2/20/2019by Ron

Need a gasket for Jandy pump JHP 2.0, serial number 106FA 4039. It is the large gasket on end of pump between electric motor and pump. Has a 6 bolt pattern. Is this gasket ( r0555900 ) the correct one? Thanks.
 Reply

A  Answered on 2/20/2019 by InyoPools Product Specialist Kevin G.

Yes, this would be the correct body gasket for your pump.
 Reply


?     Asked on 5/15/2020by Robert Barber

Is this the gasket for a Jandy JHPU 1.0 I believe the serial number is GC4F1276 but it is hard to read as it is faded.

 Reply

A  Answered on 1/5/2021 by InyoPools Product Specialist Hector F.

Hi Robert, yes this is the correct body gasket for the Jandy Stealth PHPU series pool pump. 
 Reply


?     Asked on 12/6/2020by Jose Gregorio

I need a gasket for my pomp,Pantair whisper flo model number wfe6,serial number 1-02-B04,

 Reply

A  Answered on 12/10/2020 by InyoPools Product Specialist Hector F.

Hi Jose, there a few gaskets for this pump but please see this Pentair Whisperfo parts diagram where all gaskets will be listed. 
 Reply


?     Asked on 12/11/2020by Frank Wang

Need a gasket for Jandy pump PHP 1.5, serial number E03FL2219. It is the large gasket on end of pump between electric motor and pump. Has a 6 bolt pattern. Is this gasket ( r0555900 ) the correct one? If not, what is it? Thanks. Frank
 Reply

A  Answered on 12/15/2020 by InyoPools Product Specialist Hector F.

Hi Frank, yes this is the correct seal plate gasket for the Jandy Stealth PHP series pool pump. 
 Reply


?     Asked on 9/13/2022by Joann Cole

Will this seal plate gasket fit my Jandy Stealth pump JHP-JHPU ? I need a gasket body JHP series R0555900
 Reply

A  Answered on 10/16/2022 by InyoPools Product Specialist Hector F.

Hello Joann, yes this seal plate gasket is compatible with the Jandy JHP - JHPU series pool pumps.  
 Reply


Top
Write A DIY Story
Difficulty

Est. Repair Time

Less than 1 hr

Tools Needed

None

2     1

The gasket is longer than the groove.

Written on 4/14/2020 by Guest

Coat gasket with silicone
Fill groove with silicone
Starting at bottom and working up both sides press gasket in groove
At top, keep working gasket until it stays in place

Were these instructions helpful? 
 

Top

Review Summary

 (Average 4.34  out of 5 stars)
6 Rating
(33%) 2 of 6 customer would recommend this product to a friend.
5 star:
 
(5)
4 star:
 
(0)
3 star:
 
(0)
2 star:
 
(0)
1 star:
 
(1)
Write A Review

The Most Recent Reviews

 (5 out of 5 stars)  Worked great!

Reviewed By:  Inyo Customer ()

Worked great!


Was this review helpful to you? 
 

 (5 out of 5 stars)  It fit perfectly and I installed.

Reviewed By:  Inyo Customer ()

It fit perfectly and I installed.


Was this review helpful to you? 
 

 (1 out of 5 stars)  Inferior Parts

Reviewed By:  Inyo Customer ()

This aftermarket part will not fit into the groove as it is not manufactured correctly.


Was this review helpful to you? 
 

 (5 out of 5 stars)  Perfect fit

Reviewed By:  Rich from jamestown, ca ()

Perfect fit


Was this review helpful to you? 
 

Recommended Products