By G&P Tools LLC
Part # 0208-0
Manufacturer Code Q-CS1
Dimensions 1" L x 1" W x 1" D
INYO # 0208-0G & P TOOLS # Q-CS1
************************************************
GENERAL DESCRIPTION: CORD STOPPER RETRO F/ 3/4" CONDUIT THIS IS A TAPERED RUBBER PLUG USED TO HELP SEAL AROUND THE LIGHT CORD THIS IS A SPLIT PLUG USED FOR A RETROFIT THIS HAS 1 HOLE FOR THE CORD
************************************************
MATERIAL: BLACK RUBBER - SPLIT ON ONE SIDE
************************************************
DIMENSIONS: OUTSIDE DIAMETER: 15/16" (A) LARGE END OUTSIDE DIAMETER: 3/4" SMALL END LENGTH: 1" (B) CORD HOLE DIAMETER: 3/8"
************************************************
I'm replacing Amerlite in pool and spa. Niches and lights circa 1996. Installing Jandy Watercolor LEDs. Do I need these stoppers, and if so, what size do you think I'd need? Haven't removed the lights yet to see inside the niche. If water is supposed to go into the conduit anyway, why are these a good idea? Thanks for answering these questions. Craig
Reply
Hi, Craig. A Cord Stopper is cleaner than using an alternate sealer for your conduit. I'm not sure which one you will need, you will have to locate your niche model or conduit size. You can purchase one of each and return the one you don't use.
Reply
