$152.49

Qty:

By Custom Molded Products


Details

Top

Part # 4627-23

Manufacturer Code TM-12-H8

Alternate Part #'s 27515-154-000, 39258509R, 39258509R000, 4628-30, 4802-01CP, DVK-7, HAY-06-271, PL0714, PRA-56-4006, SP071113, SP071114, SP0714T, TM-12-H8, _27515-154-000, CMP27515154000

Product Description

INYO # 4627-23 JACUZZI #39-2585-09-R THE REPLACEMENT VALVE IS THE SAME VALVE AS THE ORIGINAL THIS IS A CMP REPLACEMENT THE ORIGINAL VALVE WAS AN OLDER MODEL AND LOOKS VERY SLIGHTY DIFFERENT FROM THE CURRENT VERSION, BUT THE DIFFERENCE IS VERY, VERY SLIGHT. THE REPLACEMENT IS AN EXACT REPLACEMENT AS FAR AS LOOKS, PLUMBING, AND FUNCTION ONCE INSTALLED.

Top

?     Asked on 5/9/2010by Guest

It says this is no longer available. Do you have a substitute part for this?
 Reply

A  Answered on 5/9/2010 by InyoPools Product Specialist Patrick P.

We do sell a generic version of thisĀ valve which is still available anhere >http://www.inyopools.com/Products/07501352028298.htm
 Reply


?     Asked on 5/15/2021by Pete

Will this valve replace my Praher NSF-50 Model SM10-AO Top Mount? Serial #931752. Thanks!
 Reply

A  Answered on 5/18/2021 by InyoPools Product Specialist Patrick P.

Hi Pete, No this is not the replacement for the SM10-AO. Please click on this link to view or purchase the SM10-AO Replacement Valve which will be required for your filter.
 Reply


?     Asked on 3/27/2022by donna pellegrino

hello, does the top mount multiport valve 1.5"-tm-12-h8 come with a diverter gasket or does it need to be purchased separately? is anything else needed or is this a complete replacement for splash pak dial valve 15vk part no. 39258509?
 Reply

A  Answered on 3/30/2022 by InyoPools Product Specialist Craig C.

Hello Donna.  The Customer Molded Products Top Mount Multiport Valve 1.5" TM-12-H8 is a complete valve assembly, no additional parts purchase is necessary.  This is an aftermarket replacement for part number 39258509.  The Jacuzzi OEM replacement is part number 4628-30.  Complete Valve 15vk Splash Pak (39-2585-09r000) - 4628-30
 Reply


Top
Difficulty

Est. Repair Time

Less than 1 hr

Tools Needed

Pliers, Adjustable Wrench

We were replacing a leaky top mount multiport valve.

Written on 6/10/2021 by Guest

We drained our pool down below the intake. We then disconnected the input/output hoses, loosened the bracket that holds the valve on and then removed the valve. We seated the new valve, moved the bracket that holds the valve tight and tightened the screws on it. We then inserted the fittings and attached the intake and output hoses. We then refilled what water was drained. After filling, we turned the filter back on and checked for leaks.

Were these instructions helpful? 
 

Top

Review Summary

 (Average 5  out of 5 stars)
1 Ratings
5 star:
 
(1)
4 star:
 
(0)
3 star:
 
(0)
2 star:
 
(0)
1 star:
 
(0)