By Nidec Motor Corporation (formerly Emerson Motors)
Part # 5238-74
Manufacturer Code AGH75FL1
BODY LENGTH IS 7-7/8"
Hello,
S55CXNFE-7055 Emerson where does the white and black wire go?
Reply
Good afternoon, You will want to place them on L1 and L2. you will see to screws that hold them in or you can clip on quick connects and stick it right on the terminal post.
Reply
Hello, how many l/min we can get from this motor?
Reply
Hi, Rodrigo. The motor alone does not determine the flow rate but the pump as a whole and the Feet of Head of the body of water. If you can get us that info we can determine the flow rate.
Reply
Hello, Can you tell me if this is the right replacement for the following pump? This is what I am able to find on the face plate:
MagneTek (Century Pool & Spa Motor) 1081/1563 Pump Duty
Part: 7-184803-23
Cat: (unspecified)
Type: SP
Volts: 230
Amps: 5.7
HP: (unspecified)
Hz: 60
SF: (unspecified)
RPM: 3450
Code: G
Encl: DP
FR: V48Y
Form: PHS
Insul Class: B
Phase: 1
Thanks,
Chase
Reply
Hi, Chase. This AGH75FL1 Motor is the correct replacement for Part: 7-184803-23.
Reply
Does this motor come with an impeller? If not, which part do I need?
Reply
These motors do not come with impellers. In order to cross-reference the impeller that you need we will need the model number of the front pump housing that the motor actually bolts to. If that information is not legible you can always send us images of that housing to upload@inyopools.com so we can look into that for you.
Reply