Hello,
S55CXNFE-7055 Emerson where does the white and black wire go?
Reply
Good afternoon, You will want to place them on L1 and L2. you will see to screws that hold them in or you can clip on quick connects and stick it right on the terminal post.
Reply
Hello, how many l/min we can get from this motor?
Reply
Hi, Rodrigo. The motor alone does not determine the flow rate but the pump as a whole and the Feet of Head of the body of water. If you can get us that info we can determine the flow rate.
Reply
Hello, Can you tell me if this is the right replacement for the following pump? This is what I am able to find on the face plate:
MagneTek (Century Pool & Spa Motor) 1081/1563 Pump Duty
Part: 7-184803-23
Cat: (unspecified)
Type: SP
Volts: 230
Amps: 5.7
HP: (unspecified)
Hz: 60
SF: (unspecified)
RPM: 3450
Code: G
Encl: DP
FR: V48Y
Form: PHS
Insul Class: B
Phase: 1
Thanks,
Chase
Reply
Hi, Chase. This AGH75FL1 Motor is the correct replacement for Part: 7-184803-23.
Reply
Does this motor come with an impeller? If not, which part do I need?
Reply
These motors do not come with impellers. In order to cross-reference the impeller that you need we will need the model number of the front pump housing that the motor actually bolts to. If that information is not legible you can always send us images of that housing to upload@inyopools.com so we can look into that for you.
Reply
I have a Jcm series pump.pump part #J p/n 02-1308-05 and Jcm p/n 02-1309-04. will they fit the Nidec Motor Corp(formerly Emerson Motors) EMERSON THRUBOLT MOTOR, SINGLE SPEED, 3/4 HP, 230 V, 5.7 AMPS. with the result of your research seems to be the replacement for MagneTek (Century Pool & Spa Motor) 1081/1563 Pump Duty Part: 7-184803-23 Cat: (unspecified) Type: SP Volts: 230 Amps: 5.7 HP: (unspecified) Hz: 60 SF: (unspecified) RPM: 3450 Code: G Encl: DP FR: V48Y Form: PHS Insul Class: B Phase: 1
Hi, Abner. This AGH75FL1 motor is the correct replacement.
Reply
So I should be able to remove the j series pump from my old motor and tune it up with GOKIT65 , replace any broken parts and reattach it to the AGH75FL1 motor.
Reply
I recently bought a house with a hottub. The one motor is shot, and I need a replacement. Will this be sufficient for it, or do I need a different model? I was told I would need new shaft seal as well. Is that something I would buy off amazon for instance? If i can does it attach to this? I am new to hot tubs and just want to make sure this an equivalent replacement unit for my motor. thanks
Is this the correct replacement for S55CXNFE-7055, 1563 and 1795 motor?
Hi Michael, yes this is the correct replacement motor for your motor included in the photo. When replacing a pool motor we do suggest a Seal Kit. Could you send us a few photos of your pump so we can suggest the proper seal kit? If so then please take a wide shot of the complete pump to include the pipes going in and out of the pump. To supply photos simply click the reply link below and upload your photos or chat with a live representative using our web page. Once we get those photos we can make the proper recommendation for your seal kit.
Reply
Is this the correct replacement for S55CXNFE-7055, 1563 and 1795 motor?
Hi, yes this is the correct replacement motor for your motor model S55CXNFE-7055. When replacing a pool motor we do suggest a Seal Kit. Could you send us a few photos of your pump so we can suggest the proper seal kit? If so then please take a wide shot of the complete pump to include the pipes going in and out of the pump. To supply photos simply click the reply link below and upload your photos. Once we get those photos we can make the proper recommendation for your seal kit.
Reply