Product Description

THIS ITEM HAS BEEN REPLACED BY PART NUMBER 9140F WHICH MAY REQUIRE (2) OF THE 7153-0 REDUCER BUSHINGS INYO # 9185-99 THERMCORE # C2550-0314ET ALLIED # 2-00-5000 BRETT # 22-5012 AQUATEMP # 20-00417 THIS IS A 15", 2.25" DIAMETER STAINLESS STEEL FLOW THRU HEATER THIS IS A BRETT AQUALINE REPLACEMENT HEATER ORIGINAL BRETT # WAS 22-5012 LENGTH: 15" (LENGTH OF TUBE ONLY FROM FLANGE TO FLANGE) DIAMETER: 2.25" ENDS: FLANGED WITH UNIONS WATTAGE: 5.5 KW, 240 VOLTS (1.4 KW AT 120 VOLTS) TAILPIECES: (2) 2" SLIP TAILPIECES, REPLACABLE UNION NUTS, O-RINGS (THREADS ON 2" UNION TAILPIECES ACTUALLY MEASURE 3-1/16" DIAMETER)

********************************************************************************************************************************

DETAIL MEASUREMENTS - THE MEASUREMENTS SHOWN ARE FROM THE FLANGE CLOSEST TO THE ELEMENT LEAD TO THE CENTER LINE OF THE ITEM ALL OF THE ITEMS SHOWN BELOW ARE IN LINE WITH THE ELEMENT LEADS ON THIS HEATER ELEMENT LEADS: 2) THESE ARE REPLACEABLE AND INCLUDE ELECTRICAL CONNECTER NUTS AND WASHERS 1ST LEAD 4-3/8" FROM FLANGE 2ND LEAD 5-5/8" FROM FLANGE THERMOWELLS: (1) EXTERNAL DUAL THERMOWELL MOUNT ON THE TOP OF THE HEATER 8-3/4" TO THE CENTERLINE OF THE THERMOWELL MOUNT PRESSURE SWITCH TAP: 3" FROM FLANGE 1/8" FEMALE THREADS (1/8" THREADS ACTUALLY MEASURE ABOUT 7/16" DIAMETER) THREADED STUDS: (2) THREADED STUDS WITH NUTS AND LOCKWASHERS THESE ARE IN LINE WITH THE ELEMENT LEADS 1ST STUD 2" FROM FLANGE 2ND STUD 12" FROM FLANGE