By Zodiac


Details

Top

Part # 6200-132B

Manufacturer Code R0096400

Alternate Part #'s R0096400, V0073800, 47-295-1444, JNDR0096400, LAR-151-2601

Product Description

USED ON TELEDYNE LAARS MILLIVOLT NATURAL GAS MODELS ESG (SERIES 2) & LLG (LAARS LITE) ROBERT SHAW GAS VALVE NUMBER "VS829 H2040" THIS NUMBER IS MARKED ON THE LABEL ..... INCLUDES GAS VALVE 10577200 ANTI ROTATION BRACKET R0037000 PILOT TUBING WIRE NUT PILOT TUBING COMPRESSION FITTING

Top

?     Asked on 5/14/2015by Joe

What gas valve replaces.VS8H2040. 3/4 inch
 Reply

A  Answered on 5/14/2015 by InyoPools Product Specialist Lennox H.

Joe, I was unable to find a heater that uses a gas valve with the part number VS8H2040. If you can provide us with the manufacturer and model number for you heater we can find the correct gas valve for your unit.
 Reply


?     Asked on 5/20/2015by Wayne

I'm looking for a gas valve for a LAARS LITE Model # LLG25ON. Can you get it and how much will it cost.
 Reply

A  Answered on 5/20/2015 by InyoPools Product Specialist Patrick P.

Hi Wayne you would require the LLG Gas Valve listed here
 Reply


?     Asked on 8/8/2015by Ray

Is r0096400 valve ok for handy lite 2 model no. Lg175 n--c
 Reply

A  Answered on 8/11/2015 by InyoPools Product Specialist Lennox H.

Hi Ray, The Gas Valve, Esg Nat. (R0096400) will work with your Jandy Lite 2 model # LG175 unit.
 Reply


?     Asked on 8/29/2015by Charley

I've got a Jandy Lite 2 LG250N. The pilot light will not stay lit. Is there a place to check voltage and if so, what voltage should I expect?
 Reply

A  Answered on 9/1/2015 by InyoPools Product Specialist Lennox H.

Hi Charley, The Gas Valve should register above 220mVDC. You can find other troubleshooting info and steps in the Laars Lite 2 Installation and Operation Manual.
 Reply


?     Asked on 5/8/2016by Daniel

Hi I have a jandy light 2 which is lp gas and I wot to change it to natural gas what would I need to change in my jandy thanks
 Reply

A  Answered on 5/12/2016 by InyoPools Product Specialist Lennox H.

Hi Daniel, Unfortunately, the Jandy Lite 2 heaters are unable to be converted.
 Reply