Product Description

INYO # 4031-060 PENTAIR # 513331 GENERAL DESCRIPTION: THIS IS A PENTAIR PRODUCTS STANDARD SMALL SKIMMER FACEPLATE GASKET THIS IS A RUBBER BUTTERFLY TYPE GASKET THIS IS ACTUALLY 2 GASKETS JOINED AT THE INSIDE HOLE THE INSIDE GASKET SLIPS THRU THE WALL SKIMMER OPENING AND THE OUTSIDE GASKET STAYS ON THE OTHER SIDE OF THE WALL. THIS IS ALSO KNOWN AS A WALL PROTECTION GASKET, SINCE THE GASKET HELPS PROTECT THE WALL OPENING MATERIAL: WHITE RUBBER SHAPE: RECTANGULAR WITH A TOTAL OF 14 HOLES THERE ARE 5 HOLES IN THE TOP AND THE BOTTOM THERE ARE 2 HOLES ON EACH SIDE.

*******************************************************************************

DIMENSIONS: OUTSIDE LENGTH: 7-1/4" (A) OUTSIDE HEIGHT: 7" (B) INSIDE LENGTH: 5-3/4" INSIDE HEIGHT: 5-1/2"

*******************************************************************************

HOLES: THESE ARE 1/4" IN DIAMETER THESE MEASUREMENTS ARE FROM THE HOLE CENTER TO HOLE CENTER TOP AND BOTTOM: THERE IS A HOLE IN THE CENTER THE 2 HOLES NEXT TO THE CENTER HOLE ARE 1-3/16" FROM THE CENTER HOLE THE NEXT 2 HOLES ARE 1-3/16" FROM THESE SIDE: THERE IS NOT A HOLE IN THE CENTER THERE IS A HOLE ABOVE AND ONE BELOW THE MIDDLE OF THE GASKET THESE ARE 1-1/16" FROM THE MIDDLE, 2-1/8" FROM EACH OTHER

*******************************************************************************

MARKINGS: THERE ARE NO MARKINGS

*******************************************************************************

SUBSTITUTES: THE 4041-37 WILL REPLACE THIS BUT IS JUST SLIGHTLY LARGER AT THE OUTSIDE THERE SHOULD BE OTHERS, JUST CHECK THE HOLE PATTERN NOTE DATE: 5-7-2009

Review Summary