Part # 3550-24
Manufacturer Code SPX0580Z2
Dimensions 7-5/8" X 3/4"
REPLACES Astrolite/Duralite Lens Gasket - SPX0580Z2 Need the Original by Hayward, click here SPX0580Z2 inyopools.com/Products/02200015001175.htm
7-7/16" O.D.
6-5/8" I.D. bottom lip
6-7/8" I.D. top lip
9/16" thick (height) at outside edge
DOES THIS GASKET FIT HAYWARD HOUSING MODEL # SP-600 OR SP-607
Reply
Ron, This gasket will only work on the Hayward Astrolite - SP580 Series. Model number SP-600 & SP-607 reference the niche not the light fixture.
Reply
I need a replacement lens gasket for a lens # SP-540-z-1 I measure the existing gasket as having a diameter or 7-3/4". Can you suggest a replacement? My existing gasket is several years old I suppect. Thanks,
Reply
Hi Ben, The Lens Gasket for Starlite, Duralite, CHD and Poolstar Light (SP-540-Z-2) would be the correct replacement for your Hayward Starlite Light. You can find other replacement parts via the Hayward Starlite Parts Diagram.
Reply
Less than 1 hr
Screwdriver, Mild cleaner, soap and water
1 0
The problem was that our pool light was leaking and the incandescent bulb was blown.
We wanted to see if it was an old gasket that had not been replaced when the last bulb was installed.
If the light continues to leak and bulbs blow, then the whole unit will need replacement, creating an opportunity to then bite the bullet and pay for a new LED setup to go with the existing 12V system.
Shut off power to existing pool light. Remove light and enclosure from niche by unscrewing retaining screws. My unit has one at the base. Refer to the internet as your unit may be different.
Place the unit on the deck. Unscrew stainless steel ring. This ring holds the lens glass to the unit and intern to the plastic cover plate. It's a great idea to take a picture of the assembly position before disassembling to make reassembling identical.
Remove old gasket from light lens paying attention to the front facing edge.
Clean glass lens edge, fit new gasket, making sure it faces the same way as the old one.
Make sure to dry fit everything before reassembling. Test light! Replace niche in the pool and secure back with plastic ring and screw(s).
1 to 2 hrs
Screwdriver, Pliers
1 0
Removed each light from the niche with a single screw. Layed the fixture on a towel on the pool deck, Removed the clamp from the fixture with a single screw. Screw nuts dissolved as soon as the screw turned. Discovered that the plastic face rims were melted/deformed on both lights. Ordered replacement face rims from Inyo - delivered the next day. Removed the lens and replaced the gasket. Screwed in the new LED bulbs. Added a thin bead of silicone gasket lube. Placed the lens back on the fixture. Fitted the new face rim to the light and aligned the clamp. Replaced the screws and nuts with new stainless steel parts. Reattached the fixture into the niche via the 'hook' on the bottom of the face rim and the screw on the top. Takes a little patience to get the screw to bite, especially in the deep end. New lights look awesome!
1 to 2 hrs
Screwdriver, Nut Drivers, Pliers
1 0
Turned off power to pool light.
Remove one screw that holds light into went niche.
Took fixture out of water and sat on pool deck.
Unscrewed clamp holding fixture together.
Separated lens from fixture.
Remove old bulb and replace with LED bulb.
Cleaned everything and replace lens gasket.
Reassemble fixture and lens with clamp.
Place fixture back in wet niche and replace screw that holds it in place.
1 to 2 hrs
Screwdriver, Nut Drivers, Pliers
Turned off power to pool light.
Remove one screw that holds light into went niche.
Took fixture out of water and sat on pool deck.
Unscrewed clamp holding fixture together.
Separated lens from fixture.
Remove old bulb and replace with LED bulb.
Cleaned everything and replace lens gasket.
Reassemble fixture and lens with clamp.
Place fixture back in wet niche and replace screw that holds it in place.
The Most Recent Reviews
(5 out of 5 stars)
Reviewed By: Inyo Customer ()
Needed this quickly; got it quickly. Perfect fit and seal.
Was this review helpful to you?
1 0
(5 out of 5 stars) Gasket to use When Replacing an Under Water Pool Light
Reviewed By: Inyo Customer ()
I had to replace an under water pool light (Hayward Pool Light Model SP058115). This gasket Astrolite LensGasket SPX0580Z2 (Generic). It was really cheap insurance to replace the gasket sealing the water out when you replace the pool bulb. This job took very little skill to accomplish myself, and I am very happy to have saved myself hundreds of dollars by doing it myself. The light has been working for several months now, so it seems to have worked well.
Was this review helpful to you?
1 0
(5 out of 5 stars)
Reviewed By: Inyo Customer ()
Always should put on a new gasket with new light
Was this review helpful to you?
1 0
(4 out of 5 stars)
Reviewed By: Inyo Customer ()
Does the job of keeping water out. Could use some instructions. Pay close attention to how your old one is installed so you will know how to install the new one.
Was this review helpful to you?
1 0
(5 out of 5 stars) Perfect Replacement
Reviewed By: Steven S. from Orange County, CA ()
Having to replace a light on a pool that was built by the prior owner of our home, I wasn't sure of the model numbers for the gasket. Luckily, the product description was very informative. Once received, it fit perfectly.
Was this review helpful to you?
1 0
(5 out of 5 stars) Thank you for the quick shipping
Reviewed By: Ricky J. from Mountain Home, AR ()
Thank you for the quick shipping of the pool light gaskets that I ordered! Trying to get our pool open before the summer rush and found out that we had 2 lights out. Received gaskets within just a couple of days of ordering. They were exactly what I needed. That's great service! Thank you!
Was this review helpful to you?
1 0
(5 out of 5 stars) Perfect fit
Reviewed By: Dan V. from East Granby, CT ()
While reading the online instructions for pool light bulb replacement, they recommended purchasing a new gasket as well. I'm glad they did since the old one was falling apart when I removed it. Great advice! I'm glad I listened.
Was this review helpful to you?
(5 out of 5 stars) Great search engine
Reviewed By: Clyde P. from Smithville, Texas ()
Pros: Fast & efficient
I was in need of a gasket for my 25 year old pool. I had the part number but the number was unrecognizable at other web sites. At INYO Pools, their search engine quickly and easily found the part. I ordered it and I received it quickly. Great search engine and prompt service.
Was this review helpful to you?
(5 out of 5 stars) Great replacement gasket
Reviewed By: Brent S. from Emmaus, PA ()
Pros: Great fit.
Gasket fit light housing perfectly. No fuss installing.
Was this review helpful to you?