$80.20

Qty:

By Waterco


Details

Top

Part # 5005-09

Manufacturer Code 6340152

Alternate Part #'s 413020, 6340152, 63401525, 35-252-1165, BAK63401525, WTU-101-1004

Product Description

Waterco HydroStorm/Plus/Star Impeller 2.0 HP - 6340152

**Note: This Impeller P/N 6340152 has been replaced/superseded by P/N 63401525.**

Top

?     Asked on 3/8/2017by Paul R. Powers

Is the Hydrostrom Impeller Assy 2 Hp (6340152) Part # 5005-09 By Waterco a direct replacement for the discontinued Jandy R0555804 Impeller for a 2 hp motor? Thanks, Paul R. Powers
 Reply

A  Answered on 3/8/2017 by InyoPools Product Specialist Megan C.

Yes, you may replace the Impeller, 2 Hp Full, 2-1/2 Hp Uprate(r0555804) with the Hydrostrom Impeller Assy 2 Hp (6340152). Do not forget to replace the Pool Pump Shaft Seals anytime you decompress the impeller. 
 Reply


?     Asked on 8/20/2017by Phillip D White

I have a Jandy PHPU2.5 pump. Serial # JO6FD1291. Will this impeller work on my pump.. I ordered one before and was sent a SKU: RO479605 but the shrew hole is bigger than the shaft.
 Reply

A  Answered on 8/22/2017 by InyoPools Product Specialist Lennox H.

Hi, Phillip. You can use this Hydrostrom Impeller Assy 2 Hp - 6340152 with the Jandy PHPU2.5 Pump. 
 Reply


?     Asked on 1/10/2020by greg

I have a JHPU2.5 JANDY PUMP, will this impeller fit? Thanks Greg
 Reply

A  Answered on 1/14/2020 by Industry Professional

The correct impeller should be mfg # R0555804 (35-295-1079 ) the 6340152 ( 35-252-1165) is an alt that will work but is from a different pump model.
 Reply


?     Asked on 1/27/2020by andrew k.

will this part replace a jandy JHP 2.0 stealth pump?
 Reply

A  Answered on 1/29/2020 by InyoPools Product Specialist Lennox H.

Hi, Andrew K. Yes, this Impeller can be used as a replacement for your Jandy JHP2.0 pump. 
 Reply


?     Asked on 11/19/2020by Ed Hoff

I’m looking for a new impeller and shaft seal for n American products serial # 14670 and model # 382598 pump 2 hp motor do you have a replacement ?
 Reply

A  Answered on 12/1/2020 by InyoPools Product Specialist Hector F.

Hi Ed, could you send us a few photos of your pump and motor? Please take a close up shot of the motor label as well as a wide shot of the complete pump to include the pipes going in and out of the pump. To supply photos simply click the reply link below and upload your photos. Once we get those photos we can make the proper recommendation.
 Reply


Top

Review Summary

 (Average 0  out of 5 stars)
0 Rating
5 star:
 
(0)
4 star:
 
(0)
3 star:
 
(0)
2 star:
 
(0)
1 star:
 
(0)