Part # 5121-31
Manufacturer Code 91694150
Dimensions 3" L x 4" W x 4" D
INYO # 5121-31 AQUA FLO # 91694150 THIS IS A 1.5 HP IMPELLER USED ON THE AQUA FLO XP AND XP2 PUMPS BLACK PLASTIC IMPELLER INCLUDES: IMPELLER ONLY CLOSED FACE NUMBER OF VANES: 7 OUTSIDE DIAMETER: 4-1/16" (A) THICKNESS: 5/16" (INSIDE THICKNESS AT OUTSIDE EDGE) THICKNESS: 1/2" (B) (OUTSIDE THICKNESS AT OUTSIDE EDGE) FRONT TO BACK: 3" (FROM END OF SHAFT TO FRONT ON INTAKE) INLET INSIDE DIAMETER: 1-7/8" INLET OUTSIDE DIAMETER: 2-1/8" SHAFT COVER LENGTH: 1-7/16" SHAFT COVER OD 5/8" (THIS IS WHERE THE IMPELLER SCREWS ONTO THE MOTOR SHAFT) MARKINGS: "9169425" IS MOLDED ONTO THE IMPELLER NEAR THE OUTSIDE EDGE OR THERE ARE 3 COLORED DOTS ON THE IMPELLER SHAFT WITH THE SHAFT FACING UP, LEFT TO RIGHT - BLUE, GREEN, YELLOW SHAFT SEAL USED WITH THIS IMPELLER OPT # 5250-104 MFG# 92500150 GENERIC # PS-200 OR AS-200
I have a Coleman Model 455 hot tub with ozone generator that was installed in 2003. I need seals for the motor/pump which is a Flo-Master XP2, Model #06125474-2. Motor is an Emerson 2-1/2 hp. The impeller has #9169425 embossed on the outer edge and the shaft has two white dots. Do you have seals for this unit?
Reply
Hi Robert, You can find all the replacement seal for the Flo-Master XP2 via the >Aqua-Flo XP & XP2 Parts List.<
Reply
What is the length, or depth, of the recessed area of the impeller eye which holds the wear ring on 91694150? The wear ring for this model is 7/16 deep. Thanks!
Reply
Hi, The Eye Length is 11/16".
Reply
The Most Recent Reviews
(4 out of 5 stars) impeller
Reviewed By: Mark M. from denmark, WI ()
Pros: nice illistration
Cons: slow to order
i liked the idea that they had a photo and all measurements of the impeller. that made me have confidence in ordering the right part. bad part i odered part 12-22 and first recieved it on 1-8
Was this review helpful to you?