Part # 5057-08B
Manufacturer Code C105-236PC
Dimensions 4.44" X 0.39"
Impeller, 1.5 HP Sta-Rite - C105-236PC
This impellar ihere isnt accurate for the 1.5HP motor. I purchased it based on the info here and it not turning inside of the diffuser. I checked the old one and it said C105-236P. I contacted the folks here to confirm the correct model and they told me that it is in fact the 236P and not the 236PC. When I asked why the site says 236PC I was told that they are the same. The specs on each are not the same, dimensions are different so please make sure you are buying the correct impellar,
Reply
Hi. Impeller P/N C105-236P (3/4 HP) and C105-236PC (1.5 HP) are two different size impeller. In order o locate the correct impeller, please provide the model of your pump and motor.
Reply
Less than 1 hr
Screwdriver, Socket Set, Wrench Set, Allen Wrench
This was a fairly easy repair to perform:
1. Removed the bolts from the seal plate and the strainer pot.
2. Using an allen wrench to keep the motor from spinning (allen wrench goes in the back side of the motor and needs to be held) then i was able to hand crank the impeller off the motor shaft.
3. The repair was as simple as putting the new impeller on. My seal gasket was in great shape so i chose to not replace. If you want to replace while you are in there you can do that as well.
4. Re-Assemble the pump housing.
5. Test for leaks while running.
The Most Recent Reviews
(4 out of 5 stars) Good
Reviewed By: Rogelio S. from Fort Lauderdale, FL ()
Good Good quality and delivery, videos posted are very helpful
Was this review helpful to you?