$43.47

Qty:

By Gecko Alliance


Details

Top

Part # 5121-32

Manufacturer Code 91694200

Dimensions 3" L x 4.5" W x 4.5" D

Alternate Part #'s 354021412, 91694200, 35-402-1412, AF91694200

Product Description

INYO # 5121-32 AQUA FLO # 91694200 THIS IS A 2 HP IMPELLER USED ON THE AQUA FLO XP AND XP2 PUMPS BLACK PLASTIC IMPELLER INCLUDES: IMPELLER ONLY CLOSED FACE NUMBER OF VANES: 7 OUTSIDE DIAMETER: 4-3/8" (A) THICKNESS: 1/4" (INSIDE THICKNESS AT OUTSIDE EDGE) THICKNESS: 1/2" (B) (OUTSIDE THICKNESS AT OUTSIDE EDGE) FRONT TO BACK: 3" (FROM END OF SHAFT TO FRONT ON INTAKE) INLET INSIDE DIAMETER: 1-7/8" INLET OUTSIDE DIAMETER: 2-1/8" SHAFT COVER LENGTH: 1-7/16" SHAFT COVER OD 5/8" (THIS IS WHERE THE IMPELLER SCREWS ONTO THE MOTOR SHAFT) MARKINGS: "91694200" IS MOLDED ONTO THE IMPELLER NEAR THE OUTSIDE EDGE OR THERE WILL BE 2 BLUE DOTS ON THE IMPELLER SHAFT. SHAFT SEAL USED WITH THIS IMPELLER OPT # 5250-104 MFG# 92500150 GENERIC # PS-200 OR AS-200
Top
Difficulty

Est. Repair Time

Less than 1 hr

Tools Needed

Screwdriver, Pliers

Leaky pump seal

Written on 10/10/2017 by Guest

Remove and discard used impeller. Remove and replace wet end housing seal. Using emery cloth remove rust and lightly grease motor shaft
Install spring seal onto impeller CAREFUL not to touch ceramic surfaces. Install wet end housing and screw impeller not to tight as motor spin direction will keep it tight. Reassemble pump using new o rings and Teflon lube such as Aladdin magic lube .

Were these instructions helpful? 
 

Top

Review Summary

 (Average 5  out of 5 stars)
1 Ratings
5 star:
 
(1)
4 star:
 
(0)
3 star:
 
(0)
2 star:
 
(0)
1 star:
 
(0)

The Most Recent Reviews