$72.45

Qty:

By Pentair Pool Products


Details

Top

Part # 5056-09CA

Manufacturer Code C105-138PEB

Dimensions 4.685" X 0.3"

Alternate Part #'s 351021040, 40508, 600415, 788379733834, C105-138PEB, C105138PEB, STA-101-3706, STA1013706, 35-102-1040, PENC105-138PEB, PENC105138PEB

Product Description

INYO # 5056-09CA PENTAIR/STA-RITE # C105-138PEB

Frequently Bought with this Impeller

Shaft Seal for Seal Plate with Copper Cone 5250-100
Shaft Seal for Seal Plate without Copper Cone 5250-104
Diffuser 5056-10C

************************************************

GENERAL DESCRIPTION: CLOSED FACE IMPELLER. THIS IS A 3/4 HP FULL RATED OR 1 HP UP RATED IMPELLER THIS DOES NOT HAVE A HOLE FOR AN IMPELLER SCREW

************************************************

MATERIAL: LIGHT TAN OR BLACK PLASTIC TYPE: CLOSED OR OPEN FACE CLOSED NUMBER OF VANES: 6

************************************************

DIMENSIONS: OUTSIDE DIAMETER 4-11/16" (A) TOTAL LENGTH: 1-15/16" OUTSIDE THICKNESS AT EDGE: 5/16" (B) INSIDE THICKNESS AT EDGE: 3/16" INLET OPENING OUTSIDE DIAMETER: 1-7/8" INLET OPENING INSIDE DIAMETER: 1-1/2"

************************************************

MARKINGS: "C105-138P" IS PLAINLY MOLDED INTO THE IMPELLER "EB" IS EITHER LIGHTLY MOLDED IN OR WRITTEN ON THE IMPELLER

Top

?     Asked on 8/13/2017by John

I am trying to put a GOKIT6 in my Sta-Rite Max-E-Glas (pre 1998)--1 HP, but cannot get the impeller off. Do you know if any tricks? IO could put a rod into the cooling fins on the motor to try and hole it in place, but do not want to break anything. I pulled the back cover off the motor and tried to hole the shaft with a screwdriver, but this is definitely not a good idea. Help? Thanks.
 Reply

A  Answered on 8/15/2017 by InyoPools Product Specialist Lennox H.

Hi, John. Check the impeller to make sure it does not have an impeller screw. It will have to be removed before removing the impeller. Then use a 7/16" wrench to lock the motor shaft in order to remove the impeller. You can also follow the steps in our How To Replace the Motor on Your Pool Pump guide. 
 Reply


?     Asked on 10/4/2018by Tom Sinclair

What seal fits this impeller?
 Reply

A  Answered on 10/6/2018 by InyoPools Product Specialist Lennox H.

Hi, Tom. Use the complete part listing for Sta-Rite Dura-Glas and Max-E-Glas Pump to locate the correct shaft seal based on seal plate style you have.
 Reply


Top
Difficulty

Est. Repair Time

2 to 4 hrs

Tools Needed

Screwdriver, Socket Set

The original was 11 years old and it just would not seal anymore

Written on 7/1/2023 by Guest

We removed the old one greased the new one good and mounted it corrrctly. tightened it down and it was ready for the motor to be mounted.

Were these instructions helpful? 
 

Top

Review Summary

 (Average 5  out of 5 stars)
3 Rating
5 star:
 
(3)
4 star:
 
(0)
3 star:
 
(0)
2 star:
 
(0)
1 star:
 
(0)

The Most Recent Reviews