$319.58

Qty:

By Waterway


Details

Top

Part # 5296-0

Warranty 1 Year

Manufacturer Code B2233

Dimensions 12.5" L x 9.5" W x 6.5" D

Alternate Part #'s 187390, 187693, 193313, 3720821, 372082113, 8-187693-01, B2233, B233, F56AA54A01, TT502, 35-126-1152

Product Description

Century 2.0 HP Thru-Bolt 56Y Dual Speed 230V Motor - B2233

Features: All copper windings, Auto protector, Open drip proof, Stainless steel threaded shaft, Thrubolt pump mount, "1081" design, 60 HZ, 230V, H.P = 2 High Speed / .25 Low Speed, Full load Amps = 7.4 High speed / 1.4 Low Speed, Frame 56Y, Threaded Shaft.

Note: This motor is NOT California Title 20 Compliant

Motor Dimensions Motor Dimensions
Motor Image Motor Image

Product Specifications

Motor Name:
2 HP B233 & B2233 Replacement Spa Motor
Waterway HP - SPL Rating:
2.0/ .25
Speed:
Dual
RPM:
3450/1725 RPM
Volts:
230 V
Amps:
8/3 amp
Frame:
56Y
Stock #:
B233 or B2233
Shaft:
Threaded
Overload Protector:
Auto
Dimension Letter:
C
Dimensions:
11.87 in.
Waterway #:
3721021
Insulation Class:
F
Commonly Used On:
Waterway Spa Pumps
Notes:
HP-SPL is a special horsepower rating used by Waterway
Top

?     Asked on 1/11/2012by Guest

What is Service Factor?
 Reply

A  Answered on 1/11/2012 by InyoPools Product Specialist Patrick P.

Service Factor(SF) is a multiplier that when multiplied by the horsepower of the motor indicates the total permissible horsepower loading that may be carried when the motor is operating at rated voltage and frequency. The most important thing to remember when replacing a motor is that the replacement motor's horsepower times its service factor must be equal to or greater than the original motor's horsepower times its service factor. The Service Factor rating can be found on the motor label. See Step 4 of our How to Read a Pool Motor Label guide.
 Reply


?     Asked on 12/29/2018by Inyo Visitor

My pump runs at high speed on start up but not at low speed for moving/heating water. Is this usually a bad motor or a controls issue? Thanks!
 Reply

A  Answered on 1/3/2019 by InyoPools Product Specialist Joe S.

Certain types of two-speed motors actually have two separate windings in one housing.  Most have a separate main and phase windings.  Still, a few two-speed designs only have a low-speed main winding.  This design always starts at high speed and switches to the low speed run winding within a couple of seconds.  This motor was a less expensive design since there was no low-speed start windings or start capacitor.
 Reply


Top

Review Summary

 (Average 0  out of 5 stars)
0 Rating
5 star:
 
(0)
4 star:
 
(0)
3 star:
 
(0)
2 star:
 
(0)
1 star:
 
(0)