Product Description

INYO # 4090-25 OLYMPIC # UNI-191ABS GENERAL DESCRIPTION: THIS IS A COMPLETE INLET FITTING WITH EYEBALL AND HOSE ADAPTOR FOR USE IN ABOVE GROUND POOLS MATERIAL: WHTIE PLASTIC BODY, NUT, EYEBALL RUBBER AND CARDBOARD GASKETS

***********************************************************

DIMENSIONS: BODY: FACEPLATE DIAMETER: 3-1/2" THREAD LENGTH: 1-5/16" INSIDE BODY: 1-1/2" FEMALE PIPE THREADS (ABOUT 1-7/8" ACTUAL INSIDE DIAMETER) OUTSIDE BODY: 2" MALE PIPE THREADS (ABOUT 2-3/8" ACTUAL OUTSIDE DIAMETER) GASKETS: ALL ARE APPROXIMATELY 3-3/8" OUTSIDE, 2-3/8" INSIDE DIMENSIONS: EYEBALL: (THIS IS JUST LIKE A HAYWARD SP1419D EYEBALL IN DESIGN) THE THREADS ARE 1-1/2" MPT, THE ORIFICE IS 7/8". DIMENSIONS: HOSE ADAPTOR: 1-1/2" MALE PIPE THREADS ONE END (ACTUAL DIAMETER ABOUT 1-7/8") HOSE END IS 1-1/4" AT THE END AND STEPS UP TO 1-1/2" THERE IS A VERY SLIGHT TAPER THE FITTING WILL WORK WITH EITHER A 1-1/4" OR 1-1/2" HOSE

***********************************************************

INCLUDES: BODY AND NUT EYEBALL FITTING WITH 7/8" ORIFICE (1) CARDBOARD FLAT GASKET (2) RUBBER FLAT GASKET

***********************************************************

MARKINGS: NO MARKINGS

***********************************************************

SUBSTITUTES: THERE IS NOT A SINGLE SUBSTITUTE FOR THIS, BUT ALL OF THE ITEMS INCLUDED MAY BE REPLACED AS SHOWN BELOW 3705-2 THIS WILL REPLACE THE WALL FITTING WITH NUT AND GASKETS 9348-218 THIS WILL REPLACE THE WHITE 3 PIECE EYEBALL FITTING 7249B THIS WILL REPLACE THE HOSE ADAPTOR

Review Summary