$25.86
By Pentair Pool Products
Need to replace label on my top mount 2inch multiport Pac-Fab model SM-20-3 valve. Please advise.
thanks,
Steve DeVore
Reply
Hi Steven, The Decal F/top Assy. Valve 2" (e-5-s2) would be the correct replacement decal for the SM-20-3 Valve.
Reply
I have a Pac Fab Full Flow 2" multi-port valve. The valve label shows 27-2101. The valve is approximately twenty eight years old. It still works well, but will not totally seal when I turn it back to the "Filter" position. A small stream of water continues to run out of the discharge hose, when the pump is running and not running. I have purchased new spider gaskets as recently as this Spring, but that does not stop the leak. Can you tell my what parts I should purchase?
Thank you.
Reply
Hi Jay, If replacing the spider gasket and springs did not stop the leak your best option is to replace the entire valve giving the age of the valve. If you insist on repairing the valve you can try replacing the Diverter (272413) and or the Top, Valve Assembly (272422).
Reply
I have a valve 27-2101 REV K. I need a replacement due to breaking the selector handle. I can not find an exact match. What valve top replaces it perfectly?
Reply
Hi, Travis. You can use the Pentair - Pac Fab Hi-Flow 2" Multiport Valve as a direct replacement. The valve label style has changed.
Reply
were do i find witch gasket i need for my sand filter
Reply
Could you send us a few photos? To supply photos simply click the reply link below and upload your photos. Once we get those photos we can make the proper recommendation.
Reply