By Waterco
Part # 5020-074
Manufacturer Code R0555300
Dimensions 11" L x 10.5" W x 1.5" D
Pot Lid w/ Collar - R00555300
The original Jandy lid was discontinued. It is now replaced with a lid by Waterco. The lids are identical.
Air is leaking from the lid, I installed a new gasket lubed it up good, worked for a about 6 months but now leaking again.
I took it apart and cleaned every thing re installed and still leaking. The pump is 03-04 could the lid be bad? or do i need a new gasket again? Do you have an oversized o ring?
Reply
Hi Ken, if you are gearing air being pulled into the lid area then there could be a few possibilities. I would suggest inspecting the pot itself for any warp, or hairline cracks. Also the same for the lid itself.
Reply
Does this lid fit a Model # SHPF 1.5 - 2
I'm sucking air, replaced O ring and have put silicone paste on it, it works for periods and then not. Can have this happen when gone for long periods
Thanks. Rick L.
Hi Rick, this will not fit your Jandy Stealth SHPF or SHPM Series Pump but this Lock Ring, Lid, & O-ring - R0445800 will be perfect. As you know, be sure to clean the sealing surfaces and put some lubricant on them to help it seal perfectly and last a long time.
Reply