Part # 3500-01A
Manufacturer Code 619355Z
Dimensions 1" X 0.16"
Pilot Screw, For SS Face Plate - 619355
Is this the one screw that is used to attach the Sta-Rite light fixture to the pool?
Reply
Sta-Rite Light screw for P/N 05101-0004.
Reply
I have the screw, though missing the Gum O ring, can i find this at the hardware store? or have to get a whole screw with gum ring.
Reply
Hi Himanshu, You can check but I can't say for certain if you can find one at your local hardware store. You can purchase the Gum Washer (98208500) separately.
Reply
Looking for the screws that hold the housing in the light niche. Are these the ones?
Reply
I would need to know which niche you have to know if those are the correct screws. Do you have a model or part number? If not, please attach a picture so I can identify what you have.
Reply
Have an American Products pool light (model # M559351) that is coming out of it's housing in the side of my gunite inground pool. In looking closer, it's missing the one screw on the outside. Do you know the dimensions of a replacement screw? Also, is American Products out of business or did it get bought by another company?
Reply
Hi DB, American Products was acquired by Pentair quite a few years back. Here is a link to the view Parts Breakdown for The Amerlite you will need key #4 which can be found here Amerilite Locking Screw and Gum Washer sometimes the threaded port that the locking screw screws into gets stripped and if this is the case you will need one of these Pool Light Wedges
Reply
