$27.93

Qty:

By Aladdin


Details

Top

Part # 4623-10

Manufacturer Code 272409

Dimensions 7.64" X 2.39"

Alternate Part #'s 1348410, 272409, G-400, G400, PAC0613004, 90-423-2004, AEQG400, ALDG-400-0, APCG3329

Product Description

Aladdin Gasket for Pentair Hi-Flow Valve 7-5/8"OD, 5 Spokes - 272409

Top

?     Asked on 2/9/2017by Richard

My gasket measures 6 3/4 in. Do you have that size?
 Reply

A  Answered on 2/10/2017 by InyoPools Product Specialist Lennox H.

Hi, Richard. It would be easier if you provide the model number of the valve. If you don't have the model number you can provide photos of the valve of dimension of the gasket to include outside and inside diameter and the center ID and OD.
 Reply


?     Asked on 2/14/2018by Inyo Visitor

Will this work for a 272101 model valve?
 Reply

A  Answered on 2/15/2018 by InyoPools Product Specialist Lennox H.

Hi. Yes, this Valve Seal - 272409 will fit the valve with p/n 272101 on the label. 
 Reply


?     Asked on 8/17/2018by Inyo Visitor

Will this fit pentair 272101
 Reply

A  Answered on 8/17/2018 by InyoPools Product Specialist Lennox H.

Hi. Yes, this Valve Seal - 272409 will fit the Pentair valve with Part # 272101. 
 Reply


?     Asked on 10/9/2019by John Girdzus

what is the correct spider seal for a pentair diverter valve pn 27-2120. thank u.
 Reply

A  Answered on 10/9/2019 by InyoPools Product Specialist Hector F.

The spider gasket for this valve is part number 4623-10.
 Reply


?     Asked on 2/2/2020by Paul

Have a PacFab/Pentair DE multiport valve and am sure this is correct part number. Old gasket was a $%ITCh to get out. Now that I'm getting close to installing, does the wide/deep part of the gasket go into channel or the shallower side and does it need to be glued down? Mine was glued like crazy!!
 Reply

A  Answered on 2/4/2020 by InyoPools Product Specialist Lennox H.

Hi, Paul. The side with the rounded raised ridges goes up and the new gasket will have to be glued in. 
 Reply

  • Commented on 2/5/2020 by Product Owner

    The gasket I keep finding and ordered doesn't have a raised/rounded top to it. The one I removed did, but this one doesn't. One I ordered is Penair 272409 and has two raised sides, one much taller than the other side.
     Reply

    • Commented on 2/6/2020 by InyoPools Product Specialist Lennox H.

      Paul, The side with the shorter ridge faces up.
       Reply


Top
Difficulty

Est. Repair Time

4 to 8 hrs

Tools Needed

Screwdriver, Socket Set

The spider valve was leaking when I did backwash

Written on 7/16/2018 by Guest

First I had to remove the old gasket this was not easy because it was melted or glued so it took a long time once it was off new gasket was placed on yippee

Were these instructions helpful? 
 

Top

Review Summary

 (Average 5  out of 5 stars)
2 Rating
5 star:
 
(2)
4 star:
 
(0)
3 star:
 
(0)
2 star:
 
(0)
1 star:
 
(0)

The Most Recent Reviews