Product Description

INYO # 6020-01 SR SMITH # 05-623

Recommended for pool slides, the Plastic Deck-Mounted Anchor Flange Kit is used for surface-mounting equipment with 1.90" OD tubing. The kit includes a bolt, bushing, two washers and a lock nut (US thread). It also requires four mounting bolts to attach it to your deck, not included.

************************************************

GENERAL DESCRIPTION: THIS IS A ROUND FLANGE WHICH MOUNTS ON TOP OF THE DECK USED FOR A RAIL OR LADDER WITH A RAIL OUTSIDE DIAMETER OF 1.9" (1-7/8" APPROXIMATELY) THIS INCLUDES THE BOLT TO ATTACH THE RAIL TO THE FLANGE THIS DOES NOT INCLUDE THE ANCHORS TO MOUNT THE FLANGE TO A CONCRETE DECK THIS IS USUALLY USED FOR INGROUND SLIDES

************************************************

DETAILED DESCRIPTION: MATERIAL: PLASTIC FLANGE, STAINLESS STEEL BOLT COLOR: OFF WHITE SHAPE: ROUND, WITH A FLAT FLANGE ON THE BOTTOM THE FLANGE HAS 4 MOUNTING HOLES THERE IS A HOLE IN THE UPPER FLANGE BODY WITH THE CENTER OF THE HOLE AT 1-5/16" FROM THE TOP THIS IS FOR THE BOLT WHICH HOLDS THE RAIL IN PLACE

************************************************

DIMENSIONS: OUTSIDE DIAMETER: 6-3/8" (BOTTOM MOUNTING FLANGE) OUTSIDE DIAMETER: 2-3/16" (TOP OF FLANGE) INSIDE DIAMETER: 1-15/16"(TOP INSIDE) HEIGHT: 3" MOUNTING HOLES: THERE ARE A TOTAL OF 4 MOUNTING HOLES EVENLY SPACED ON THE FLANGE BOTTOM THE CENTER TO CENTER MEASUREMENT FROM ONE HOLE TO THE OPPOSITE HOLE IS 5" THE CENTER TO CENTER MEASUREMENT FROM ONE HOLE TO THE NEXT HOLE IS 3-1/2"

************************************************

INCLUDES: MOUNTING FLANGE BOLT, NUT, AND WASHERS TO HOLD RAIL IN PLACE.  The 4 mounting bolts are not included.

Review Summary