By Essex Group
Part # 5270-271
Manufacturer Code BC-88M-250
Dimensions 1-3/4" x 3-3/8"
THERE IS A CATALOG ERROR IN THE PRINTED 2007 CATALOGS THE DIMENSIONS SHOWN ARE INCORRECT THE ACTUAL DIMENSIONS ARE: LENGTH: 3-3/8" DIAMETER: 1-13/16" POOL CATALOG PAGE G-11 SPA CATALOG PAGE I-5
I have a Hayward 1-HP (SP3007X10AZ) pool pump. It can be wired for 120-V or 220V. mine is wired for 220V. The starter capacitor went out and on the capacitor it states that it is a 110vac 161-192 uf. Should the capacitor be a 220-V?
Reply
Hi Donald the correct capacitor for you would be the 1 HP Super II Start Capacitor
Reply
I have CENTURY PHPF1.5 POOL MOTER PUMP start capacitor goes out which capacitor go with it ?
Reply
Good morning Shoji , On the capacitor there will be a number with uf or mfd at the end. I would need that number. You can give me a call if you would like ext.711. Happy Holidays!
Reply
We think our capacitor on our hot tub is bad c61 50uf 250v.ac Do you have anything like that
Reply
Hi. We do not have a capacitor that matches those spec and without the motor model or part number, I can confirm if this capacitor will work. If you can reply with the motor info I can confirm.
Reply
Have 1 hp pool pump @ 240vac 3450RPM and power factor of 1.4. Can't read the start capacitor mfd. What size start cap do I need?
Reply
Hi. I will need the motor's MOD, CAT or PART # in order to locate the replacement capacitor.
Reply
Century Pump Motor 7-151825-20, with capacitor CS108125 I would like to config from 125V to 220V service. Do I need to replace the capacitor from 125VAC to 250VAC ?
Reply
Hi, Frank. You do not have to replace the motor capacitor if the motor voltage is going to be changed.
Reply
