$514.55

Qty:

By Hayward Pool Products


Details

Top

Part # 4800-05

Manufacturer Code SX200BT

Dimensions 23.5" L x 23.5" W x 13.5" D

Alternate Part #'s HAY0512185, SX200B, SX200BT, 31-150-1524, HAYSX200BT, HPPSX200BT

Product Description

Replacement Filter Tank Top for the Hayward S-200 Pool Sand Filter

Commonly Used on:

  • Hayward S-200 Sand Filter
Top

?     Asked on 6/4/2015by Inyo Visitor

would this top fit on my S240 sand filter
 Reply

A  Answered on 6/4/2015 by InyoPools Product Specialist Andy O.

The Filter Tank Top, Taupe (sx200bt) 4800-05 is for the S200, the filter top for the s240 is Filter Tank Top (sx240b) 4800-05a which is obsolete. Because of the size i doubt the S200 top will fit. I would call Hayward at 908-355-7995 to see if they have a part that will retrofit.
 Reply


?     Asked on 8/3/2015by helene hamrick

I need to replace the dome on my s200 Hayward sand filter. Do I need to order new gaskets? Would my dome lid fit the replacement dome?
 Reply

A  Answered on 8/5/2015 by InyoPools Product Specialist Lennox H.

Hi Helene, The I would recommend getting the Hayward S200 O-ring Kit since you're replacing the Top Filter Tank (SX200BT). You can reuse the current Dome Lid.
 Reply


?     Asked on 4/23/2017by Inyo Visitor

Is there any difference between the taupe version and ivory version other than color?
 Reply

A  Answered on 4/25/2017 by InyoPools Product Specialist Stacey M.

Hello, as for 4800-05 I would check the specs for this unit 23.5" L X 23.5" W X 13.5" D, but there isn't any difference from ivory to taupe.
 Reply


?     Asked on 6/6/2017by Bill Berkley

I need to replace the dome on an S200 high rate sand filter - What is the delivery time to Lynchburg Va. for this order and what would shipping cost be?
 Reply

A  Answered on 6/11/2017 by InyoPools Product Specialist Patrick P.

Delivery time is 3-5 business days.
 Reply


?     Asked on 6/11/2017by Patricia Grundhauser

I need to replace my Dome.Will all the other parts be easy to reuse?
 Reply

A  Answered on 6/11/2017 by InyoPools Product Specialist Hector F.

If you are a fairly handy person then it really shouldn't be to hard to replace. As far as the other parts, it will just depend on the condition of them. Over time with chlorine, the sun and pressure some parts do not work very well after such a job like this. Ultimately you may want to inspect.
 Reply


Top
Difficulty

Est. Repair Time

Less than 1 hr

Tools Needed

Nut Drivers, Socket Set

1     0

My old top cracked under high pressure

Written on 2/23/2020 by Guest

Replaced with a new top (really cheap by the way) from Inyo pools

Were these instructions helpful? 
 

Top

Review Summary

 (Average 5  out of 5 stars)
1 Ratings
5 star:
 
(1)
4 star:
 
(0)
3 star:
 
(0)
2 star:
 
(0)
1 star:
 
(0)