$397.68
By Raypak
Part # 6234-08
Manufacturer Code 005241F
Dimensions 8" L x 5.5" W x 1.75" D
THIS IS THE CIRCUIT BOARD USED IN THE THERMOSTAT ON THE IID (ELECTRONIC IGNTION) RAYPAK RP2100 USED ON PRIOR 11/98 INCLUDES CIRUIT BOARD WITH MOUNTING HARDWARE DOES NOT INCLUDE CONTROL PANEL, KNOB, ETC. CIRCUIT BOARD MEASURES 6-5/8" x 4-1/4" WE HAVE A GOOD PICTURE OF THIS POTETIOMETERS MOUNTED ON THE BOARD THIS IS THE DUAL THERMOSTAT BOARD, INCLUDES 2 AFTER 11/98 USE 6234-78
model no C-R407A-EN-C ASME gas natural. need the circuit board, is this the replacement? 661-205-9503
Reply
Hi Al, We will need to know the age of your unit to confirm but the PCB/Control (013464F) is what listed for units manufactured from 10-22-04 - CURRENT.
Reply
What is your return policy? Do you charge for delivery if returned due to defect?
Do you pay for return delivery?
I only ask due to a competitor who does.
Reply
Hi, Click link to view Return Policy and Warranty Policy. If the unit is defective and the manufacturer confirms we will cover the return shipping.
Reply
Original control board replaced in 2005 and it was an upgrade as my RP2100 original went obsolete in 1988. Is this a direct replacement (p/n 241169 Rev-2). I really only need the thin plastic cover over the circuit board mode button, up and down temperature buttons and display.
Thanks
Reply
I have an older Raypak RP2100 P-R405A with digital display. I need a replacement board. The PC Board shows P/N 601587 - ASSM PCB & P/N 601588.
What part number do I need??
.jpg?format=jpg&scale=both&anchor=middlecenter&autorotate=true&height=75&width=75&mode=pad)
.jpg?format=jpg&scale=both&anchor=middlecenter&autorotate=true&mode=pad&width=650&height=650 "Raypak T-stat Control, Pc Board Iid (005241f)")
Yes this mfg # 005241f is correct (47-197-1648)
Reply
does this replace the RayPak part number 008260F
Reply
Hi David, unfortunately, the Raypak PC board part number 008260F has been discontinued by the manufacturer with no listed replacement. You can always contact Ray Pak directly to double-check if you would like at (805) 278-5300.
Reply
