$173.25

Qty:

By Waterco


Details

Top

Part # 4591-01

Manufacturer Code 228042

Dimensions 12" L x 7" W x 7" D

Alternate Part #'s 228042P, TM12B, WC228042P, 26-253-1005, PRTM12B

Product Description

INYO # 4591-01 WATERCO # 228042 THE ORIGINAL VALVE IS NO LONGER AVAILABLE THE REPLACEMENT IS A PRAHER VALVE. PRAHER NUMBER IS TM-12-B. OPT.# 4707PH REPLUMBING WILL BE REQUIRED. THE PORTS ARE IN BASICALLY THE SAME PLACE BUT THE PRAHER REPLACEMENT VALVE IS NOT SET UP TO USE THE SAME UNION FITTINGS AS THE ORIGINAL WATERCO VALVE.

Top

?     Asked on 8/13/2012by Guest

Will this backwash valve fit the waterco T500 ?
 Reply

A  Answered on 8/13/2012 by InyoPools Product Specialist Patrick P.

Yes this valve listed here is  Thread in style backwash valve for the Waterco T500 Sand Filter.
 Reply


?     Asked on 11/1/2014by peter

Will this fit the s600 Waterco filter? I have a screw on type valve.
 Reply

A  Answered on 11/4/2014 by InyoPools Product Specialist Patrick P.

Yes this valve made by Praher Valves will replace the valve used on the Waterco S600. If your current valve has a six sided top and external threads on 3 of the valve ports and is connected to the plumbing with unions, then you will a little re-plumbing which you will need to do.
 Reply


?     Asked on 11/14/2014by Roberto Roldan

Will this valve replace the A0102200 for the ST24-T sand filter?
 Reply

A  Answered on 11/15/2014 by InyoPools Product Specialist Patrick P.

Yes this valve is the correct replacement for the A0102200 valve which was used on the ST24-T sand filter.
 Reply


?     Asked on 3/8/2015by Max

I had one of these installed with a new pool 14 years ago and experienced the handles snapping off on four occasions during this time. am not sure if your current model will fit the thread of the sand filter itself or if the diameter of the pipes has altered and is the unit complete with all of the required internal parts ? Kind Regards, Max. in Melbourne, Australia.
 Reply

A  Answered on 3/9/2015 by InyoPools Product Specialist Hector F.

As long as you are replacing the same model valve with the exact replacement model then all will remain the same. Also if you are not sure then have the specific filter model and cross reference the valves used for that filter model.
 Reply


?     Asked on 6/5/2015by Susie

I replaced this valve but the filter/ backwash/recirc/etc is not in the right place. Moving the handle to gilter did not filet, tried moving the handle to recirculate seems like it may be the filter. Is there anyway to tell the difference between it being on filter vs Recirculate?
 Reply

A  Answered on 6/16/2015 by InyoPools Product Specialist Lennox H.

Susie, When the valve is in "Recirculate" mode it will bypass the filter, which the pressure gauge will be at '0' and in "Filter" mode it will go through the filter which the pressure gauge will show the pressure increase.
 Reply


Top

Review Summary

 (Average 4.75  out of 5 stars)
8 Rating
5 star:
 
(6)
4 star:
 
(2)
3 star:
 
(0)
2 star:
 
(0)
1 star:
 
(0)

The Most Helpful Review


The Most Recent Reviews