$36.77

Qty:

By Hayward Pool Products


Details

Top

Part # 5271-08

Manufacturer Code SPX1500S8

Dimensions 1.5" L x 1.5" W x 0.75" D

Alternate Part #'s SPX1500S8, _SPX1500S8, HAYSPX1500S8, HPPSPX1500S8

Product Description

On/Off Motor Switch - SPX1500S8

**Alternate Option**
DUAL SPEED SWITCH - SPX1500S9

Top

?     Asked on 9/2/2016by EUGENE JARISCH

will this fit on sp1592
 Reply

A  Answered on 9/2/2016 by InyoPools Product Specialist Megan C.

Hello, Eugene. Yes, the On Off Motor Switch (spx1500s8) PART # 5271-08 is the correct replacement for the Hayward Matrix Pump SP1590 SERIES. Click here to view the schematic for the Hayward Matrix Pump Parts.
 Reply


?     Asked on 11/7/2016by G Scott

i have a Power Flo Matrix 1081 Pump system, model SP 1515-z-1-esc. i need a replacement power switch, and you only show one version, part 5271-08. concerned about size, can you please verify that this switch will work on my pump, or provide model available which will work.
 Reply

A  Answered on 11/7/2016 by InyoPools Product Specialist Lennox H.

Hi G, This On/Off Motor Switch can be used with the Hayward SP1515-Z-1-ESC motor.
 Reply


?     Asked on 6/7/2017by Inyo Visitor

how to install
 Reply

A  Answered on 8/3/2017 by InyoPools Product Specialist Alex V.

Hello, The switch is pressed into the opening using the tabs on the ends of the switch. To remove the old switch, you will need to squeeze the tabs. We recommend taking a photo of how the switch is wired before disconnecting the wires. 
 Reply


?     Asked on 7/11/2017by Hal

will this switch (SPX150058) work with my powerflo matrix model no SP15931TLFP 1.5 HP motor? The switch has 3/4 HP stamped on the side and my pump is 1.5 HP.
 Reply

A  Answered on 7/11/2017 by InyoPools Product Specialist Lennox H.

Hi, Hal. This On/Off Motor Switch will work with the Powerflo Matrix Pumps.  
 Reply


?     Asked on 7/29/2017by Racheal

Will this switch work on a flo matrix sp1510zxescr?
 Reply

A  Answered on 7/30/2017 by InyoPools Product Specialist Alex V.

Racheal, Yes, this will work on the Hayward PowerFlo Matrix pump. 
 Reply


Top
Difficulty

Est. Repair Time

Less than 1 hr

Tools Needed

Screwdriver, Nut Drivers

Pump switch was stuck

Written on 8/18/2020 by Guest

1. Take black cover, that houses the switch, off back of pump
2. Disconnect wires from back of switch
3. Squeeze sides of switch and push switch out of housing
4. Push new switch in and reconnect same way you took apart

Were these instructions helpful? 
 

Top

Review Summary

 (Average 5  out of 5 stars)
1 Ratings
5 star:
 
(1)
4 star:
 
(0)
3 star:
 
(0)
2 star:
 
(0)
1 star:
 
(0)