$370.57

Qty:

By Pentair Pool Products


Details

Top

Part # 6291-003

Manufacturer Code 472734

Dimensions 9" X 7-1/4"

Alternate Part #'s 472734, 473777, 47-102-1100, PEN472734, PUR-151-2734

Product Description

Autoset Board Bezel Label Assembly - 472734

Top

?     Asked on 4/11/2017by Inyo Visitor

does this replace part number 460913
 Reply

A  Answered on 4/11/2017 by InyoPools Product Specialist Scott W.

Yes, that board is for your heater model, Pentair ThermalFlo.
 Reply


?     Asked on 2/25/2019by Fernando

I wonder if this part will fit P/N 460933 ultra temp 120, I look everywhere but I couldn't find this number
 Reply

A  Answered on 2/27/2019 by InyoPools Product Specialist Lennox H.

Hi, Fernando. Yes, this Control Board Assembly - 472734 will fit the UltraTemp 120 Heat Pump 127,000 BTU - Almond - 460933 model. 
 Reply


?     Asked on 3/15/2019by Thomas

Is this board compatible with a pentair 110 heatpump model 460932? The board looks a little different.
 Reply

A  Answered on 3/20/2019 by InyoPools Product Specialist Lennox H.

Hi, Thomas. Yes, this Autoset Board Bezel Label Assembly - 472734 will work with your model heat pump. 
 Reply


?     Asked on 5/22/2019by Steve Feldkamp

Will this replace the one on the HP900 PIN 460814 Thermal Flo unit?

 Reply

A  Answered on 5/22/2019 by InyoPools Product Specialist Patrick P.

Hi Steve, Yes this is the proper replacement for the HP900 PIN 460814 Thermal Flo unit
 Reply


?     Asked on 5/24/2019by Inyo Visitor

I have the 460935 will this board support both the heating and cooling functions?
 Reply

A  Answered on 5/24/2019 by InyoPools Product Specialist Lennox H.

Hi. Yes, this Control Board will all work with the Heat/Cool model unit also. 
 Reply


Top
Difficulty

Est. Repair Time

Less than 1 hr

Tools Needed

Screwdriver

4     0

The control panel on our pool heat pump was not responding to the buttons being pressed.

Written on 5/6/2020 by Guest

1. Did an internet search for the part I needed.
2. Results show INYOpools.com as having the part.
3. Researched your company on Internet for comments and ratings.
4. All looked good. Ordered part inline and received it in a few days.
5. Replaced (with power removed at breaker box) control panel. It was easy. Power back on. It works I am HAPPY!.

Were these instructions helpful? 
 

Difficulty

Est. Repair Time

1 to 2 hrs

Tools Needed

Screwdriver

3     0

The Control Board assembly failed.

Written on 9/28/2017 by skicamp

1) removed screws holding trim onto cabinet
2) removed screws holding control board assembly in place.
3) slipped control board out of it's frame, unplugged it from the wiring harness.
4) Installed new control board following steps above in reverse order.

Were these instructions helpful? 
 

Top

Review Summary

 (Average 4  out of 5 stars)
1 Ratings
5 star:
 
(0)
4 star:
 
(1)
3 star:
 
(0)
2 star:
 
(0)
1 star:
 
(0)