$162.05
By Waterway
Part # 3783-207
Manufacturer Code 640-4707V
Availability This Main Drain Has Been Recalled and is No Longer Available
************************************************
GENERAL DESCRIPTION: 9" X 9" SQUARE FRAME AND COVER, DARK GRAY************************************************
BASIC SPECS: SCREW HOLES: 1 IN THE CENTER OF EACH SIDE 2 OF THE SIDES HAVE 3 HOLES WITH 1 IN THE CENTER SEE BELOW FOR DETAILS USAGE: APPROVED FOR FLOOR OR WALL USAGE SPECS: SPECS SHOWN ARE FOR A SINGLE UNIT FLOOR: 289 GPM @ 2.33 FPS WALL: 198 GPM @ 1.59 FPS LIFE: 7 YEARS TOTAL OPENING: 9.678 SQ INCH 186 GPM @ 1.5 FPS************************************************
DETAILED DESCRIPTION: THIS IS A 9" X 9" SQUARE REPLACEMENT COVER, FRAME AND SCREWS THIS IS AN ANTI-ENTRAPMENT RETROFIT COVER AND SCREWS THIS HAS A REGULAR GRATED SHAPE BUT THE COVER SLOPES UPWARD FROM THE OUTSIDE TOWARD THE CENTER. EACH SIDE ON THE COVER HAS A SQUARE NOTCH AT THE BOTTOM MATERIAL: PLASTIC COVER COLOR: DARK GRAY SHAPE: SQUARE************************************************
FRAME & COVER DIMENSIONS: TOTAL HEIGHT: 2-7/16" FRAME ONLY HEIGHT: 1-1/4" FRAME LENGTH & WIDTH AT PLASTER LINE: 9-1/4" (A) FRAME MAXIMUM LENGTH & WIDTH AT BOTTOM: 10-5/16"************************************************
COVER DIMENSIONS: COVER OUTSIDE LENGTH & WIDTH: 8-13/16" (A) COVER ONLY HEIGHT: 2-1/4" (B) COVER EXTENDS 1-3/16" MAXIMUM ABOVE THE FRAME WHEN INSTALLED************************************************
SCREW HOLES: THE COVER HAS SCREWS PLACED SO THE COVER WILL MATCH THE OLDER STANDARD WATERWAY, AND THE PENTAIR AND HAYWARD OLDER AND CURRENT FRAMES THERE IS ALSO AN 11/16" DEEP NOTCH, 1/2" WIDE IN THE CENTER OF EACH SIDE THE CENTERLINE OF EACH SCREW HOLE IS 5/16" FROM THE OUTSIDE EDGE OF THE COVER FROM THE CENTERLINE OF EACH SCREW HOLE TO THE CENTERLINE OF THE SCREW HOLE ON THE OPPOSITE SIDE IS 11-3/16". SCREW HOLE PLACEMENT: TOTAL SCREW HOLES - 8 THERE IS ONE SCREW HOLE IN THE CENTER OF EACH SIDE 2 OF THE SIDES HAVE AN ADDITIONAL 2 SCREWS EACH OF THESE IS 2-7/8" FROM THE CENTER HOLE MEASURED CENTER TO CENTER************************************************
SCREWS: 4 SCREWS - #8 X 1-1/4" LONG SS, SELF TAPPING PHILLIPS HEAD THESE ATTACH THE COVER TO THE FRAME************************************************
MARKINGS: 640-470X V IS MOLDED INTO THE TOP OF THE COVER AT THE EDGE 642-4710 IS MOLDED INTO THE FRAME AT THE BOTTOM EDGE THE SPECS REQUIRED BY THE VGB-2008 LAW ARE MOLDED ON THE COVER
