Part # 3792-010
Manufacturer Code WGX1048E
Dimensions 7.75" L x 7.75" W x 1.75" D
INYO # 3792-010 HAYWARD # WGX1048E THIS IS COMPLIANT WITH THE ASME/ANSI A112.19.8-2007 REGULATIONS AS SPECIFIED BY THE VIRGINIA GRAEME BAKER POOL AND SPA SAFETY ACT THIS IS A VGB-2008 COMPLIANT COVER
************************************************
GENERAL DESCRIPTION: 8" ROUND RETROFIT MAIN DRAIN COVER, WHITE
************************************************
BASIC SPECS: CENTER TO CENTER SCREW HOLE MEASUREMENT: 6" USAGE: APPROVED FOR FLOOR ONLY USAGE SPECS SHOWN BELOW ARE FOR A SINGLE UNIT FLOOR: 125 GPM LIFE: 7 YEARS TOTAL OPENING: 8.1 SQ INCH 37.8 GPM @ 1.5 FPS
************************************************
DETAILED DESCRIPTION: THIS IS THE HAYWARD WGX1048E MODEL ROUND FLOOR COVER THIS IS AN ANTI-ENTRAPMENT RETROFIT COVER AND SCREWS THE TOP IS SOLID WITH A GRATED OPENING ALL ROUND THE OUTSIDE THERE ARE A LARGE NUMBER OF ROUND HOLES IN THE TOP MATERIAL: PLASTIC COVER, STAINLESS STEEL SCREWS COLOR: WHITE SHAPE: ROUND
************************************************
COVER DIMENSIONS: COVER OUTSIDE DIAMETER: 7-3/4" (A) (MAIN FLANGE RING) COVER TOTAL HEIGHT: 1-5/8" (B) MAXIMUM HEIGHT ABOVE MAIN DRAIN BODY: 1-1/2"
************************************************
SCREW HOLES: 2 SCREW HOLES SPACED 6" APART MEASURED AT THE CENTER OF THE HOLE
************************************************
SCREWS: THERE ARE 4 SETS OF SCREWS INCLUDED THIS ALLOWS THE COVER TO BE USED WITH THE VARIOUS HAYWARD ROUND MAIN DRAINS AND FRAME AND COVERS, BOTH CURRENT AND OLDER VERSIONS 2 SCREWS - #10-24 X 15/16" MACHINE THREAD (PART# WG1030Z2AM SET OF 2) 2 SCREWS - #10-24 X 1-1/4" MACHINE THREAD (PART# WG1030Z1AM SET OF 2) 2 SCREWS - #12 X 1-1/2" SELF TAPPING (PART# WG1030Z2A SET OF 2) 2 SCREWS - #12 X 1-1/4" SELF TAPPING (PART# WG1030Z1A SET OF 2)
************************************************
MARKINGS: HAYWARD WG1048E IS MOLDED INTO THE COVER THE SPECS REQUIRED BY THE VGB-2008 LAW ARE ALSO MOLDED ON THE COVER
do you have a bumper guard for this drain cover
Reply
Hi, The Hayward Main Drain Bumper (SP1048AVH) will work with the Outlet Suction Cover (WGX1048E).
Reply
The Most Recent Reviews
(4 out of 5 stars) Good replacement
Reviewed By: big O from Blaine, TN ()
Pros: Resonable price
Item appears to have fit my pool well. Unfortunately this item needed to be replaced with the pool filled. So I held my breath and tightened the screws down as best I could.
Was this review helpful to you?
0 1
(5 out of 5 stars) Main Drain Cover
Reviewed By: William V. from Keokuk, IA ()
Needed to replace my main drain cover (installed 1988) and this cover worked great. I installed it withour draining the pool.
Was this review helpful to you?
(5 out of 5 stars) pool drain cover
Reviewed By: Richard D. from Frisco, Tx. ()
Pros: exact fit
Cons: non observed
Great product. Very easy to install
Was this review helpful to you?