Product Description

8"frame & Cover,dual Suct.-set Of 2 Grey, Ansi Ok (wg1030avgrpak2) Replaced by Dark Gray WG1030AVDGRPAK2

INYO # 3792-151 HAYWARD # WG1030AVGRPAK2 THIS IS COMPLIANT WITH THE ASME/ANSI A112.19.8-2007 REGULATIONS AS SPECIFIED BY THE VIRGINIA GRAEME BAKER POOL AND SPA SAFETY ACT THIS IS A VGB-2008 COMPLIANT FRAME AND COVER

************************************************

GENERAL DESCRIPTION: 8" ROUND FRAME AND COVER, GRAY, SET OF 2

************************************************

BASIC SPECS: CENTER TO CENTER SCREW HOLE MEASUREMENT: 6" USAGE: APPROVED FOR FLOOR ONLY USAGE SPECS SHOWN BELOW ARE FOR A SINGLE UNIT FLOOR: 125 GPM LIFE: 7 YEARS TOTAL OPENING: 8.1 SQ INCH 37.8 GPM @ 1.5 FPS

************************************************

DETAILED DESCRIPTON: THIS IS AN ANTI-ENTRAPMENT FRAME, COVER AND SCREWS THIS COMES AS A SET OF 2 FRAME AND COVERS THE TOP OF THE COVER IS SOLID WITH A GRATED OPENING ALL ROUND THE OUTSIDE THERE ARE A LARGE NUMBER OF ROUND HOLES IN THE TOP MATERIAL: PLASTIC COVER AND FRAME, STAINLESS STEEL SCREWS COLOR: GRAY SHAPE: ROUND

************************************************

FRAME & COVER DIMENSIONS: TOTAL HEIGHT: 2-5/16" (B) FRAME ONLY HEIGHT: 7/8" FRAME OUTSIDE DIAMETER AT PLASTER LINE: 7-3/4" (A)

************************************************

COVER DIMENSIONS: COVER OUTSIDE DIAMETER: 7-3/4" (MAIN FLANGE RING) COVER TOTAL HEIGHT: 1-5/8" MAXIMUM HEIGHT ABOVE FRAME: 1-7/16" THE COVER HAS 4 SMALL EXTENSIONS ON THE BOTTOM ABOUT 7/8" FROM THE EDGE THESE FIT BELOW THE TOP OF THE FRAME

************************************************

SCREW HOLES: 2 SCREW HOLES 6" APART MEASURED FROM CENTER TO CENTER OF SCREW HOLE

************************************************

SCREWS: (2 SCREWS FOR EACH OF THE 2 FRAME AND COVERS) 2 SCREWS - #10-24 X 1-1/4" MACHINE THREAD (PART# WG1030Z1AM SET OF 2) THESE ATTACH THE COVER TO THE FRAME THE FRAME HAS 2 THREADED STAINLESS STEEL INSERTS TO MATCH THE SCREWS

************************************************

MARKINGS: HAYWARD WG1048E IS MOLDED INTO THE COVER WG1058C IS MOLDED INTO THE FRAME THE SPECS REQUIRED BY THE VGB-2008 LAW ARE ALSO MOLDED ON THE COVER

Review Summary