Product Description

INYO # 3816-113 AQUASTAR # LPAV103 THIS IS COMPLIANT WITH THE ASME/ANSI A112.19.8-2007 REGULATIONS AS SPECIFIED BY THE VIRGINIA GRAEME BAKER POOL AND SPA SAFETY ACT THIS IS A VGB-2008 COMPLIANT FRAME AND COVER

************************************************

GENERAL DESCRIPTION: 8" ROUND FRAME AND COVER, LIGHT GRAY

************************************************

BASIC SPECS: CENTER TO CENTER SCREW HOLE MEASUREMENT: 7" USAGE: APPROVED FOR FLOOR OR WALL USAGE SPECS SHOWN ARE FOR A SINGLE UNIT FLOOR: 100 GPM @ 4.2 FPS WALL: 70 GPM @ 2.9 FPS LIFE: 5 YEARS TOTAL OPENING: 7.7 SQ INCH 36 GPM @ 1.5 FPS

************************************************

DETAILED DESCRIPTON: THIS IS AN ANTI-ENTRAPMENT FRAME, COVER AND SCREWS THIS IS A LOW PROFILE VERSION THE COVER HAS A SOLID TOP WITH SIDE OPENINGS AND ATTACHES TO THE FRAME WITH (2) SELF TAPING PHILLIPS HEAD SCREWS MATERIAL: PLASTIC COVER AND FRAME, STAINLESS STEEL SCREWS COLOR: LIGHT GRAY SHAPE: ROUND

************************************************

FRAME & COVER DIMENSIONS: TOTAL HEIGHT: 1-1/16" FRAME ONLY HEIGHT: 15/16" FRAME OUTSIDE DIAMETER AT PLASTER LINE: 8-1/32" (A)

************************************************

COVER DIMENSIONS: COVER OUTSIDE DIAMETER: 7-1/2" COVER HEIGHT: 7/16" (B) COVER EXTENDS 1/8" MAXIMUM ABOVE THE FRAME WHEN INSTALLED

************************************************

SCREW HOLES: 2 SCREW HOLES 7" APART MEASURED FROM CENTER TO CENTER OF SCREW HOLE

************************************************

SCREWS: 2 SCREWS - 3/4" LONG SS, SELF TAPPING, PHILLIPS HEAD THESE ATTACH THE COVER TO THE FRAME

************************************************

MARKINGS: MOLDED ON THE COVER, NO MARKINGS ON THE FRAME P/N LP8AV - 101 THRU 108 ASME/ANSI - A112.19.8-2007 THE SPECS REQUIRED BY THE VGB-2008 LAW ARE ALSO MOLDED ON THE COVER